What to make a fence. How to build a budget fence for a summer cottage - the choice of building materials. Video: self-installation of a corrugated fence

Today, a person who decides to build a house on his own should be prepared for significant costs. Most of the money is most often spent on foundations and laying walls, but in most cases you have to significantly spend money on things that at first glance seem not obvious. It's about the fence.

A reasonable owner of future housing sets out to save on such details. In addition, this is a completely justified and feasible solution.

The key way to reduce fence costs is to do it yourself. The importance of this process should not be underestimated, since the fence is not only a decorative structure that hides the territory from prying eyes, but also a protective fence designed to prevent suspicious persons from entering the site.

In other words, the design must be reliable, durable and aesthetic. Only under such conditions will it satisfy all the requirements for it. In our case, ease of installation should also be added to the list of conditions.

Materials for building a fence

There are several basic materials that allow you to build an inexpensive and functional structure:

wood;
Rabitz;
corrugated board;
plastic.

The main limiter in the construction technology and the combination of materials is financial costs. First you need to choose the material that will become the basis for the fence, then find a suitable economical construction technology, and then make basic calculations.

Wooden fence: pros and cons

Modern hardware stores offer a large number of wood options suitable for the construction of a reliable structure. This material has some advantages over others, which makes it almost the most popular product.

Advantages of wooden structures:

Flaws:

Materials for installing a wooden fence

To build a standard wooden fence, you will need materials such as picket fence, cross boards, support poles, pegs, ropes, cement, sand, a shovel, a saw, fasteners, and a special agent against wood decay.

It is best if the entire set of tools is collected in one place within reach to facilitate access to components.

Construction of a wooden fence

Stage 1. We mark the place for the structure, determine the location of the gate. We use pegs and rope. The distance between the posts is 2 meters. This is how the stability of the structure to external influences is ensured.

Stage 2. We take a shovel and dig holes for supporting pillars.

Stage 3. Immerse the pillars in the ground by about one fourth of their length.

Stage 4. We put spacers to fix the pillars and fill the pit with cement mixed with sand.

Stage 5. We drive in transverse boards.

Stage 6. We vertically fix the picket fence on the transverse boards.

Stage 7. We paint the finished fence in the selected color.

On this, the construction of a wooden fence is considered completed. This is a relatively simple version of the fence, which is usually installed as a temporary option.

Mesh fencing is considered to be the most economical option available today. Among the advantages of such fences should be noted:

Clarifying the last point, it should be noted that installation will require tools that are easy to find in every home. In addition, modern stores offer a wide range of nets of various colors and sizes, which allows you to move away from the banal appearance of the fence.

Materials for building a fence:

For those who stick to more original solutions, there are vinyl coatings, but they tend to lose color over time.

Construction of a chain-link fence

Step 1. We markup.

Step 2. We dig holes for supporting pillars.

Step 3. We place the pipes in the pits.

Mesh fence - chain-links

Step 4. Fill the pits with a pre-prepared concrete solution. In some cases, builders simply hammer the pipes into the ground with a sledgehammer. This is possible if the soil is sufficiently soft.

Step 5. We begin to fix the grid. We fix the beginning of the roll at the first pipe, which acts as the beginning of the future fence.

Step 6. We stretch the mesh around the remaining supports, gradually fixing it. It is important to ensure that the mesh does not sag, otherwise all work will be useless.

Stages of work in the sectional construction of the fence

Step 1. Laying the foundation.

Step 2. We build a frame for tension from metal corners.

Step 3. We fix the corners between the supports.

Step 4 We fix the mesh inside the corners by welding.

Chain-link fences are very easy to erect without the help of specialists, which allows you to save a lot and try your hand.

Fencing from corrugated board

This type of fence deservedly can be called the most common. Most often it is used for fencing summer cottages and private houses. To build such a fence, you will need a welding machine and a little patience. In general, the installation technology is very simple, which can be attributed to the advantages of the design.

Modern construction markets offer corrugated board in various colors and sizes, so buyers should not limit themselves to fantasies.

As additional components, you should purchase anti-corrosion paint, supporting structures, logs, shovels, self-tapping screws, and also make a cement mortar.

Installation of a fence from a professional flooring

Step 1. We carry out the markup for the future fence. It is important that the distance between adjacent supports does not exceed two and a half meters. Pegs and twine are used as auxiliary elements.

Step 2. We make recesses in the established places. In the future, support elements will be inserted into these holes. This task can be carried out using a special drill or simply dig a hole with a shovel. The depth of the pit is standard one hundred and thirty centimeters.

Step 3. We install support pillars at the corners of the territory, and then around the entire perimeter.

Step 4. We strengthen the base of the pillars with cement.

Step 5 We install the logs that are necessary for further attaching the corrugated board.

Step 6 We fasten the sheets to the logs using self-tapping screws.

Step 7. We paint the metal elements with enamel. In some cases, a primer is used.

In the end, the fence turns out to be quite pleasant in terms of aesthetic characteristics, as well as durable and reliable. It looks much more solid than a fence made of wood or chain-link mesh, and therefore can be regarded as a full-fledged fence.

plastic fence

Plastic deservedly bears the title of one of the most affordable materials for building a fence. This is a real salvation for summer residents who do not want to build expensive structures on their plots.

The positive aspects of such fences are as follows:

strength;
durability;
ease of installation;
low cost;
nice appearance.

Installing a plastic fence

Stage 1. We carry out marking on the territory where it is planned to put a fence.

Stage 2. We mark the places where the gate and gate will be.

Stage 3. In established places, we drive support pillars into the ground.

Stage 4. In the corners we fix piles made of durable metal.

Stage 5. We stretch the piles around the perimeter of the site.

Stage 6. We fix the pillars with spacers.

Stage 7. We attach the sections between the supports.

Thus, due to simple machinations, a beautiful and functional fence is obtained, which, in terms of its external qualities, although it cannot compete with structures made of decorative stone or forged elements, fully satisfies the owners of the territory.

In this article, the easiest ways to build fences were considered, the choice of which is determined only by your preferences. Now you can build a cheap fence with your own hands.

Video - Construction of a wooden fence

Video - Construction of a mesh fence

Video - Installation of a corrugated fence

Video - Installing a plastic fence

Each owner of a private house or summer cottage carries out the fencing of his territory. At the same time, there is a desire to make a fence of high quality, but at the same time not to spend significant funds. Which fence is the cheapest, it is possible to calculate, you only need to estimate the cost of the material and the amount of work.

Wooden fence - one of the most economical

The most common options

Despite the abundance of modern materials, which can be easily purchased at any hardware store, wood remains the most popular. It is available to everyone, in addition, it has a huge number of positive qualities. The advantages include low price and ease of processing. The fence from it will turn out to be of various configurations and sizes. If desired, it can be made both deaf and open.

Note! Such a fence for aesthetics and extension of the service life is usually varnished or painted with paint of any color.

solid fence

The second fence of the budget option can be made from a chain-link mesh. Such a fence is suitable if there is no need to hide something. The material completely transmits light and does not create shadows. This is ideal for gardens and orchards. Its cost is low and accessible to everyone. Installation work is carried out quickly and simply. Such a fence will last for many years, while it does not require special care.

Lets light through and doesn't obscure your view

Not so long ago, a new type of fencing appeared in stores - PVC panels. This material has a huge number of advantages that make it so popular. The first advantage is the variety of colors and textures. The panels are very resistant to environmental influences, even after a few years they will not change their appearance.

Stylish and inexpensive

No less popular and in demand among homeowners is corrugated board. He is able to serve for decades and not lose a single positive quality. To mount it, you do not need special skills, the main thing is to do all the work in stages. The material is most often attached to a pre-prepared metal frame. The only expense of money in this case is the foundation.

Fencing made of corrugated board

To purchase a corrugated board suitable for the construction of a fence, you should familiarize yourself with some of its characteristics. The first thing you should pay attention to is the variety. There are three in total:

Wall is characterized by a wave height of not more than 20 mm. It can be safely used to build a fence.
The roofing profiled sheet has a wave height of 20 to 44 mm. This group is considered an ideal option for a fence.
The carrier is used as a support element, the wave height in it can reach 160 mm.

It is also worth paying attention to the coloring. Sheets can be simply galvanized or coated with a polymer coating. The color gamut is quite wide and without much difficulty it will be possible to choose the most suitable option.

An original solution at an affordable price

You can decorate your site by making an interesting fence, which will cost quite inexpensively. A wicker fence is made from a vine and has the positive qualities of wood. In order to make such a fence, it is worth doing some training, because the expected result may not work the first time.

An interesting variant of the "living" hedge

Regardless of what material is chosen for the construction of the fence, it is very important to make a reliable frame on which it will be attached. It is recommended to paint metal parts to extend the service life, this will prevent the onset of corrosion. When deepening into the ground, the wooden posts of the frame must be treated with bituminous mastics or other waterproofing materials. They will protect the wood from moisture and decay processes. Having studied all the materials and their features, you can accurately determine which is the cheapest fence for a summer residence and choose the best option for yourself.

print page

The problem of protecting private territory from unauthorized entry is also a matter of installing a fairly cheap fence. Over that which fence is cheaper, almost every landowner thinks. But the solution to the issue of reducing the cost of the fence cannot run counter to the solution of other problems. The fence should not only be cheap, but also:

durable,
reliable,
aesthetic,
easy care.

The total cost of any fence consists of several factors:

fence length (what perimeter is planned to be closed),
the material from which the fence is erected (the cost of forging, for example, is somewhat different from the price of corrugated board),
design features of the fence being erected (the foundation device will certainly make any structure more expensive.

The cost of a fence from corrugated board

Fences made of corrugated board cover private property in about half of Russians. And this is no accident. Tired of the endless idle neighborly curiosity, the owners of the plots seek to cover their property more tightly.

Approximately every second owner believes that he is able to assemble a fence from a profiled sheet on his own. And this is true if you know some of the nuances of construction and choose the right material.

Firstly. Do not take too thin a sheet. A thin profiled sheet will wag the wind. After a few weeks, it will bend and the fence will lose its appearance. Too thick corrugated board is quite expensive. The windage of such a fence will be high and strong winds can easily loosen even deeply concreted supports. Therefore, you need to purchase a sheet with a thickness of 0.5 mm.

Secondly. Do not attach the sheet close to the soil surface. The gap is needed not to reduce windage, but to ventilate the topsoil, which is prone to rot.

Thirdly. The supports of the fence from the profiled sheet must be deepened and concreted for at least half a meter. The step of the supports should be from 1.5 to 2.5 meters.

And the last. Take a sheet with a polymer coating. Of course, galvanization seems closer and dearer to many owners. But a high-quality sheet obtained by hot-dip galvanizing is produced only in Russia and Europe. And the market is now full of sheet produced by the Chinese and obtained by cold galvanizing. Such material will not last long. Quality galvanized road. Therefore - the best option is a polymerized sheet.

The approximate cost of a fence made of corrugated board is from 1100 to 1300 rubles per linear meter.

Chain link fence cost

This is the cheapest fence. Everyone knows this. But not everyone knows that modern technologies for assembling and installing a fence make such a fence not only the cheapest, but also the most durable and reliable. Rabbed fences are good for fencing the site from the sides. A combined fence, where the facade is covered with something dense and high, and the side parts of the perimeter are fenced with a chain-link, will significantly save the owners money.

There are several types of mesh fencing:

fence from sections (each section is closed with a chain-link),
corrugated mesh fencing (it looks like a chain-link fence, with the only difference that the bars of such a mesh can be bent in a variety of directions), such a fence can have up to 5 meters between supports,
welded mesh (this is an excellent anti-vandal fence), it is somewhat more expensive than a chain-link, but cheaper than other types of fences.

The cost of a chain-link fence ranges from 360 to 630 rubles per linear meter.

wooden fence cost

A wooden fence is not just a dilapidated picket fence made of thin poles, painted in the last century. A wooden fence today can be:

In addition, wood is a fairly cheap material. Of course, if the fence is not assembled from elements carved from mahogany or ebony.

Wooden fence can be of the following types.

Fence. The height and width of the picket fence can be such as to close the perimeter not only from unauthorized entry, but also from immodest glances.
Ranch-style fencing. The plank in such a fence does not go vertically, but horizontally. This fence can also be quite high and dense.
Wattle. This decorative fence is not only cheap, but also beautiful. Wattle can be quite high.
Latticed fences. Such fences have ceased to be exotic recently. Lattice sectional fences can have the most different look and height.

On average, the cost of a wooden fence ranges from 2 to 3.5 thousand rubles. per running metre. But this is provided that the fence is two meters high.

brick fence cost

This is the most expensive fence. Only forging can be more expensive. But brick fences can stand for centuries and do not need to be repaired. Such a fence speaks of the well-being of the owners of the land.

A foundation must be laid under the brick fence. Most often this is a tape type of foundation. It must be equipped with a blind area. It will allow water to be diverted from the fence and protect the brick from destruction due to dampness and mold. The fence posts are necessarily reinforced with a metal pipe, which must be buried below the freezing level of the soil.

Despite its high cost, a brick fence can reach a height of 2 - 2.5 meters. Very often, the pillars of a brick fence are decorated with decorative lanterns or figured tops. The top of the brick fence is equipped with forged elements or barbed wire is simply laid. Some landowners run current through the wire. This enhances the anti-vandal properties of the fence. The cost of a brick fence ranges from 9150 rubles. up to 15150 rub. per running metre.

Do you want to order a high-quality and inexpensive fence?

Call us right now or request a call back!

Often, a fence for a summer cottage is erected temporarily, for the subsequent construction of a more solid structure. And often there is simply not enough money for a solid fence, so we are looking for the cheapest fence for a summer residence as an option.

To make the fence cost quite inexpensively, we will build it with our own hands. Before installing the type of fence you have chosen, be sure to take an interest in the technology of its installation and consult with a specialist.

Cheap fence for giving

The price of the fence is affected by the size of the structure and the material from which it will be made. Accordingly, a high fence is more expensive than a low one, and a solid fence is more expensive than a transparent one. A structure that is attached to dug-in or concreted pillars will turn out to be cheaper than a fence mounted on a strip foundation.

Wooden picket fence - the most budget option

From such an inexpensive material, you can make a completely beautiful and original fence for a summer residence. An example of this is a photo of finished fences.

This is a very popular fence material. The picket fence is a plank of wood, with a thickness of 18 to 22 mm and a width of 7 to 14 cm.

The height of the picket fence can be from 1.2 to 4 meters. To fasten this material, horizontal girders are used, fixed on oak, metal or concrete posts.

The approximate price of a picket fence is 700 rubles/sq.m. The final cost of the fence largely depends on the chosen installation option. For example, installing a picket fence in a checkerboard pattern or a herringbone pattern increases the price of the structure by 15-20%. The strip foundation, instead of simply driving the posts into the ground, adds 20-25% to the cost.

Fences made of thin wicker boards and a blockhouse are more expensive (from 1000 rubles / sq.m). A fence made of wicker boards attracts attention with an original look, and a blockhouse fence wins the hearts of summer residents with the quality factor of a wooden log house.

The type of fence "Ranch" came to us from the Wild West. For its construction, wide horizontal boards or beams are used, which are attached to low wooden poles. The disadvantage of such a fence is that it does not protect the site from the entry of unauthorized persons and even small animals. It is quite understandable, since this fence was created for a vast pasture area. But installing it does not take much time. And in terms of the cost of materials and work, such a fence is comparable to the price of a picket fence.

Wattle fence for a suburban area

Such a fence made of hazel or willow branches is liked by fans of the rustic style. It is original, strong enough and durable. With a strong desire, the technique of weaving branches can be mastered with your own hands in a matter of hours. If you have no time to engage in manual creativity, then you will have to pay from 500 rubles per 1 square meter for the manufacture and installation of wattle.

Anyone who is interested in building a cheap fence for a summer residence, we advise you to pay attention to an unedged board. Freeing it from the bark, sanding and varnishing, you can get a beautiful fence for a summer cottage at the lowest price (about 550 rubles / sq.m.).

Regarding the durability of wooden fences… The service life of autoclaved wood increases to 30 years. The service life of an ordinary, painted board does not exceed 15 years.

Fence for giving from a chain-link grid

The cheapest fence can be built from a chain-link mesh. It is available in different heights (1.0-3.0 meters), lengths of 10-18 meters and mesh sizes of 20-100 mm. To protect the wire from corrosion, galvanizing and polymer coating are used.

You can put up such a fence by rolling out the mesh and fixing it to metal or concrete pillars. The second option is the manufacture of mesh sections, that is, frames from corners or pipes and their installation on poles.

The service life of mesh fences reaches 30 years. Such fences do not obscure the site and at the same time are reliable, as they create a serious barrier to uninvited guests.

The average price of 1 square meter of a turnkey chain-link fence is 180-240 rubles.

Fence for giving from eurostudent

The popularity of wooden picket fences prompted stamped metal manufacturers to create something similar. The result is a very aesthetic and durable material.

In terms of service life, wood cannot be compared with it. In addition, the fence made of eurostudent does not require periodic painting and antiseptics. The protective polymer film, which is used to cover galvanized steel, retains its color and integrity for 25-30 years.

Installation of a fence made of eurostudent, taking into account the price of materials and work, is from 800 rubles per 1 sq.m.

Country fence made of corrugated board

Today it is the leader of country fence construction. Its affordable price allows any summer resident to use it to protect their site. Through such a fence not a single living soul will penetrate. Installation of a fence from a professional flooring is simple, and therefore inexpensive. To this you can add a huge selection of colors and textured pattern of the profiled sheet.

Use corrugated board with a thickness of 0.5 mm. It is not much more expensive than 0.4 mm thick flooring, but it will not be covered with dents and will not lose its attractiveness.
The pitch of the supports should be no more than 2-2.5 meters, ideally 1.5 meters. And if we take the distance between the supports at 3 m, then under the influence of wind loads, the fence canvas will begin to bend and may lose its original appearance.
Dig in the support pipes to a depth of at least 1.5 meters and be sure to concrete them.
The fence posts must be made of a pipe 60-80 mm, with a wall thickness of at least 2 mm.
Take corrugated board with a double-sided, polymer coating, since galvanized flooring (without painting), after two years, becomes stained, loses its luster and may begin to corrode.

Fence for giving from slate

For the installation of such a fence, both flat and wavy asbestos-cement slate are used. The first is stronger because it has a greater thickness.

The installation of a large format flat slate (1.5x3 meters) is faster than the installation of a smaller wavy one (1.75x1.125 m). They put the slate on steel profile runs, welded or bolted to metal posts.

The slate fence has high strength, as well as heat and frost resistance. It is more durable than wood and is not afraid of corrosion like metal. However, this material has a significant drawback - it is fragile and nondescript in appearance. And if nothing can be done about the first minus, then the second can be easily fixed - paint the slate.

Bottom line: the cheapest fence for a summer residence is a chain-link fence (200 rubles / sq.m.), the second place in price is fences made of welded mesh, wooden picket fence and unedged boards (450-600 rubles / sq.m.) , we give the third place in our rating to fences made of corrugated board, slate, blockhouse and edged boards (700-1000 rubles / sq.m.).

fence posts

During the construction of the fence, much attention is paid to the installation of pillars - the supporting part of the fence. And the more reliably they are installed, the stronger the fence will be, which means it will last longer.

Installation of fence posts

During construction, 3 methods of installing support pillars are used.

Direct driving into the ground
Partial concreting. It is carried out in two ways: pouring a concrete collar, or filling a well below the soil freezing line.
Full concrete pouring of the underground part of the rack, including the strip foundation

Which method to choose depends on the quality of the soil on the site, its saturation with moisture and the degree of freezing. Also, the choice of installation option is influenced by vertical and lateral loads created by the weight of the structure and its windage. If you decide to install a solid fence, then it must withstand the wind well, the load from which often exceeds the weight of the fence.

Direct driving of posts into the ground speeds up and reduces the cost of building a fence, but it also has many disadvantages.

If the ground is soft or loose, then the rack may loosen over time under the influence of the wind, since the fences have a large windage (if they are made of corrugated board, polycarbonate, boards).
If the height of the pole is planned to be higher than 2 meters, even from a chain-link mesh, then this method of installing the poles will also not work - any strong wind will also shake the structure.
If your site has clayey moist soil that swells at low temperatures, then the supports will crawl out of the soil by 10 centimeters already in the first winter.

That is, fence posts simply driven into the ground cannot carry a large mass load. Such an installation is suitable only for low fences with low windage. Or if there is rocky hard ground on the site.

concreting a little more complicated and costly than the first method of attaching fence supports. And yes, it will take more time. Only the hardening of concrete will take 3 weeks. But this method is more reliable, since concrete pillars will last 30-50 years without tilting. Moreover, strengthening with a concrete mixture is suitable for all types of fences, including heavy ones.

Fence brick posts

A brick support without a reliable connection with the foundation, even despite its solid weight, will not last long. A strong wind load, acting on solid sections of the fence, inevitably leads to the overturning of a column that is not fixed in the foundation. In addition, do not forget about seasonal ground movements. Falling and rising a couple of centimeters up and down during the year, the foundation must work in conjunction with the posts and sections of the fence.

The optimal design of the foundation with brick pillars, designed for a corrugated fence, is clearly illustrated by the diagram in the photo.

You can see that a steel rod made of a square pipe or a reinforcing cage is installed in the brick posts. Embedded plates are welded to it. Steel purlins are attached to them under a profiled sheet or picket fence.

Foundation type - strip rubble concrete or concrete. A trench is dug under it, and pits with a diameter of 15-20 cm are drilled at the places where the pillars are installed. First, concrete is poured into wells with pillar racks installed in them. After that, layer-by-layer concreting of the trench begins.

The main parameters of the foundation (laying depth, width, degree of reinforcement) and the height of the fence are determined by calculating the strength and stability.

For the installation of brick pillars for the fence, we used the following dimensions

trench depth - 20-30 cm;
the depth of the well for the installation of metal racks of brick pillars, counting from the surface of the earth - 90-100 cm;
the height of the grillage (the upper part of the foundation, located above the surface of the earth) - 40-60 cm;
foundation width - 20-35 cm;
the distance between the pillars is from 2.5 to 3 meters;
the height of the pillars is from 150 to 180 cm (the cross section of the masonry is 38x38 cm).

In wet soils, it is necessary to drill holes for racks below the freezing depth so that frost heaving forces do not deform the fence.

In weak and unstable soils, in the upper part of the foundation, before concreting it, it is advisable to lay a reinforcing cage of 4-6 rods with a diameter of 14-18 mm. It will preserve the integrity of the foundation and perceive the loads that occur in concrete during subsidence of the soil.

The laying of brick pillars begins no earlier than 2-3 weeks after concreting. Having laid waterproofing under the posts, you can get to work.

Perfectly even seams are a guarantee of an excellent appearance of brick columns. Experienced masons use pieces of a square bar to simplify the work, which serves as a seam template.

In the photo there is a brick support post with a section of 38 x 38 cm. Two reinforcing bars are installed inside for reinforcement. The space between them and the masonry is filled with fine-grained concrete or mortar.

For fences two or more meters high, the size of the column section is increased to 51 x 63 cm or 64 x 77 cm. Accordingly, the dimensions of the reinforcing frame increase.

metal fence posts

Steel supports are well suited for fences made of corrugated board, wood, plastic, metal mesh, welded and forged fences. These are one of the most affordable and durable solutions for installing any fence.

Iron poles are of different types: made of round and shaped pipes, screw. They also differ in height, metal thickness and diameter. It is possible to make such supports for the fence from new materials, as well as from used ones.

The diameter of a column from an ordinary pipe is usually 57, 76, 89 mm. The wall thickness can be any, but the thicker, the longer its service life.

For difficult soils, screw metal piles are used. At the bottom they have a cutting blade that allows you to insert the pipe into the soil quickly, without the use of complex equipment. With the help of this blade, the pipe is firmly held in the ground.

Distance between fence posts

When choosing metal poles, take into account our experience:

for a fence height of 2-2.5 meters, take a section of a profile pipe of 60 x 40 mm, products of 40 x 40 mm in size are suitable for 1.5 hedges,
the optimal diameter of the round pipe is 57 mm,
the maximum size of the corners of the channels installed one by one, take equal to 90 and 160 mm, respectively,
the interval between the posts should be within 2-3 meters. A smaller distance is inexpedient from the point of view of economy, but a larger one sharply reduces the reliability of the structure.

Our calculation of the pitch of the pillars with a section length of 13.4 meters and a fence height of 1.5 meters

Divide this distance into 4 sections, you get a length of 3.23 meters. With such an interval, the fence can be built from korpich or chain-link mesh on metal poles. It is undesirable to install a profiled sheet or other solid material, as the racks will be loosened by the wind.
If divided into 5 sections, you get a step of 2.56 meters. This interval is suitable for most designs.
A breakdown into 6 spans will give a distance between the pillars of 2.12 meters. You will get a reliable structure, but the price of the fence will increase. Although in this case you can save money if you take poles with a smaller section.

The optimal distance between the posts of a solid fence 2 meters high is 2.5 meters. This is an ideal option in terms of price / quality ratio when it comes to popular fences made of corrugated board on metal supports.

The owners of suburban areas, in addition to home improvement, have other tasks. For example, landscaping. Approaching this problem closely, many of them are wondering which fence is cheaper to put on their site.

After all, not everyone has enough large budget funds to install a solid structure, but at the same time everyone wants to protect their territory from unauthorized entry from outsiders and extraneous views from the street. In addition, even the most primitive fence will protect the yard from drafts and wind.

Note! First of all, the cost of the fence is affected by the price of the material from which it is constructed. Therefore, when considering the cheapest options, we will pay attention to the most budget materials for fences.

Popular materials:

Rabitz;
wood;
corrugated board;

Wood structures

Wood is considered the most budgetary material for the manufacture of fences.

Wooden structure

It has a lot of advantages:

The lowest cost.
Easily lends itself to any kind of processing.
It does not require the use of specialized professional equipment and special skills.
The installation process of the fence is not laborious.

Note! This type of raw material allows you to create fences of various configurations and sizes. You can paint the product in any shade.

The disadvantages of such fences include the need for regular staining, as well as vulnerability to fire and moisture.

There are many options for structures that can be created from wood: from wattle, which are woven from twigs and thin twigs, ending with a palisade of logs.

The most practical option is a fence made of edged boards. Lumber on the market is presented in a wide variety. To create a fence, it is recommended to take products with a height of 1.8 meters.

Structures from other materials

In second place in terms of cost are fences made of mesh.

On the market this material is presented:

chain-link;
corrugated products;
welded products.

Mesh products

The chain-link is considered the cheapest mesh option that can be used to install a fence in the country. She does not need such frequent care as wood. But with its durability, this type of material also has disadvantages: mesh sections do not create shadows and do not cover the area from drafts and views from the street.

To compensate for this shortcoming, many summer residents use a mesh fence as the basis for creating a hedge of climbing plants.

PVC fences have become popular relatively recently, but today you can often see this type of fence in suburban areas.

PVC construction

Advantages of PVC fencing:

durability;
a wide range, including various options for color and texture solutions;
low level of cost;
does not require special care.

PVC fences are absolutely not afraid of sunlight and do not deteriorate under the influence of moisture and cold weather. Unfortunately, not all stores can offer materials for creating such fences.

Decking is just as popular today as wood, although a bit more expensive. It has excellent technical and operational properties.

Products from a professional flooring

Advantages of corrugated board structures:

do not need constant care;
shield extraneous noise that can be heard from the street;
can be used as temporary and permanent fences;
durable and practical.

The disadvantages of such fences include the need to pour a concrete foundation, which will entail additional costs. Therefore, fences made of corrugated board are the most expensive of the budget structures.

Fence on your own:

You yourself will have to look for the material and check it for quality, dimensions and price compliance.
Unscrupulous sellers sell metal at a high price and with understated characteristics.
The cost of the material in the construction market is 30% higher Calculation of the material per 100 m of the fence at least 105,027 rubles.

You yourself will need to organize delivery or order freight transport at an inflated price.

The approximate cost of delivery by a GAZelle car is from 2000 rubles.

You will need a drilling tool, welding equipment, a cut-off angle grinder, an airbrush, a sledgehammer, and usually an electric generator.
The approximate cost of rent for 3 days is from 20,600 rubles. + delivery of all this at least 3000 rubles. + paint and solvent another 9000 rubles. Total: 32,600 rubles.

Overhead costs will also be present, especially if you are not strong in construction calculations. This is usually 2 more deliveries of 2000 rubles each, the purchase of additional tools and fasteners, and this is about another 1000 rubles.

Keep in mind that one cannot cope with the installation of the fence and for this you will need to use outside help. There are only 2 options for the development of events: 1) A good friend will help or 2) Hire from the outside. The cost of hired workers will cost you at least 7,000 rubles.

And now we come to the most important cost! You miss the time that you could devote to your near and dear people. This item cannot be estimated financially, but you can set the amount yourself and add it to the total cost of the costs. How much do you value the lost time, 5,000, 10,000, 30,000 or even 100,000 rubles? Add to calculation.

RUB 149,629 + wasted time!

Order a fence in the company:

You only need to choose a color, height and specify the length.
Everything else is taken care of by the company. Purchasing and checking the quality and compliance of the material with the requested characteristics.
The calculation of the material for 100 m of the fence, taking into account the primer of the gate and the gate, is 85,122 rubles.

The company has its own fleet of vehicles for delivery and therefore you do not have to worry about this problem.
Having your own transport from the company, delivery is usually free up to 80 km from the Moscow Ring Road.

The company uses its own tool and therefore the cost of acquiring and renting it will not affect you.

Overhead costs are completely absent.

The company has its own established installation teams.
They are professionals with many years of experience. And to all this we give 24 months of a guarantee.

Now the most important thing. You spend full time with your family and friends. We will not take away from you not one precious minute of your time.

We work - you rest! Therefore, ordering from us is cheaper than doing it yourself!

Your total cost will be approximately:
RUB 111,122

Cheap fence for giving, options

Wooden picket fence - the most budget option

From such an inexpensive material, you can make a completely beautiful and original fence for a summer residence. An example of this is a photo of finished fences.

This is a very popular fence material. The picket fence is a plank of wood, 18 to 22 mm thick and 7 to 14 cm wide.

The height of the picket fence can be from 1.2 to 4 meters. To fasten this material, horizontal girders are used, fixed on oak, metal or concrete posts.

Wattle fence for a suburban area

Regarding the durability of wooden fences… The service life of autoclaved wood increases to 30 years. The service life of an ordinary, painted board does not exceed 15 years.

Fence for giving from a chain-link grid

The service life of mesh fences reaches 30 years. Such fences do not obscure the site and at the same time are reliable, as they create a serious barrier to uninvited guests.

The average price of 1 square meter of a turnkey chain-link fence is 180-240 rubles.

Fence for giving from eurostudent

The popularity of wooden picket fences prompted stamped metal manufacturers to create something similar. The result is a very aesthetic and durable material.

Installation of a fence made of eurostudent, taking into account the price of materials and work, is from 800 rubles per 1 sq.m.

Country fence made of corrugated board

Today it is the leader of country fence construction. This is a dumb fence. Its affordable price allows any summer resident to use it to protect their site. Through such a fence not a single living soul will penetrate. Installation of a fence from a professional flooring is simple, and therefore inexpensive. To this you can add a huge selection of colors and textured pattern of the profiled sheet.

Use corrugated board with a thickness of 0.5 mm. It is not much more expensive than 0.4 mm thick flooring, but it will not be covered with dents and will not lose its attractiveness.
The pitch of the supports should be no more than 2-2.5 meters, ideally 1.5 meters. And if we take the distance between the supports at 3 m, then under the influence of wind loads, the fence canvas will begin to bend and may lose its original appearance.
Dig in the support pipes to a depth of at least 1.5 meters and be sure to concrete them.
The fence posts must be made of a pipe 60-80 mm, with a wall thickness of at least 2 mm.
Take corrugated board with a double-sided, polymer coating, since galvanized flooring (without painting), after two years, becomes stained, loses its luster and may begin to corrode.

Fence for giving from slate

For the installation of such a deaf fence, both flat and wavy asbestos-cement slate are used. The first is stronger because it has a greater thickness.

The installation of a large format flat slate (1.5 x 3 meters) is faster than the installation of a smaller wavy one (1.75 x 1.125 m). They put the slate on steel profile runs, welded or bolted to metal posts.

fence posts

Installation of fence posts

During construction, 3 methods of installing support pillars are used.

Direct driving into the ground
Partial concreting. It is carried out in two ways: pouring a concrete collar, or filling a well below the soil freezing line.
Full concrete pouring of the underground part of the rack, including the strip foundation

Direct driving of posts into the ground speeds up and reduces the cost of building a fence, but it also has many disadvantages.

If the ground is soft or loose, then the rack may loosen over time under the influence of the wind, since the fences have a large windage (if they are made of corrugated board, polycarbonate, boards).
If the height of the pole is planned to be higher than 2 meters, even from a chain-link mesh, then this method of installing the poles will also not work - any strong wind will also shake the structure.
If your site has clayey moist soil that swells at low temperatures, then the supports will crawl out of the soil by 10 centimeters already in the first winter.

That is, fence posts simply driven into the ground cannot carry a large mass load. Such an installation is suitable only for low fences with low windage. Or if there is rocky hard ground on the site.

Fence brick posts

The optimal design of the foundation with brick pillars, designed for a corrugated fence, is clearly illustrated by the diagram in the photo.

The main parameters of the foundation (laying depth, width, degree of reinforcement) and the height of the fence are determined by calculating the strength and stability.

For the installation of brick pillars for the fence, we used the following dimensions

trench depth - 20-30 cm;
the depth of the well for the installation of metal racks of brick pillars, counting from the surface of the earth - 90-100 cm;
the height of the grillage (the upper part of the foundation, located above the surface of the earth) - 40-60 cm;
foundation width - 20-35 cm;
the distance between the pillars is from 2.5 to 3 meters;
the height of the pillars is from 150 to 180 cm (the cross section of the masonry is 38x38 cm).

In wet soils, it is necessary to drill holes for racks below the freezing depth so that frost heaving forces do not deform the fence.

The laying of brick pillars begins no earlier than 2-3 weeks after concreting. Having laid waterproofing under the posts, you can get to work.

Perfectly even seams are a guarantee of an excellent appearance of brick columns. Experienced masons use pieces of a square bar to simplify the work, which serves as a seam template.

For fences two or more meters high, the size of the column section is increased to 51 x 63 cm or 64 x 77 cm. Accordingly, the dimensions of the reinforcing frame increase.

metal fence posts

The diameter of a column from an ordinary pipe is usually 57, 76, 89 mm. The wall thickness can be any, but the thicker, the longer its service life.

Distance between fence posts

When choosing metal poles, take into account our experience:

for a fence height of 2-2.5 meters, take a section of a profile pipe of 60 x 40 mm, products of 40 x 40 mm in size are suitable for 1.5 hedges,
the optimal diameter of the round pipe is 57 mm,
the maximum size of the corners of the channels installed one by one, take equal to 90 and 160 mm, respectively,
the interval between the posts should be within 2-3 meters. A smaller distance is inexpedient from the point of view of economy, but a larger one sharply reduces the reliability of the structure.

Our calculation of the pitch of the pillars with a section length of 13.4 meters and a fence height of 1.5 meters

Divide this distance into 4 sections, you get a length of 3.23 meters. With such an interval, the fence can be built from korpich or chain-link mesh on metal poles. It is undesirable to install a profiled sheet or other solid material, as the racks will be loosened by the wind.
If divided into 5 sections, you get a step of 2.56 meters. This interval is suitable for most designs.
A breakdown into 6 spans will give a distance between the pillars of 2.12 meters. You will get a reliable structure, but the price of the fence will increase. Although in this case you can save money if you take poles with a smaller section.

Often, among the questions about country fences, a fence between cottages is considered. Neighbors in the plots find out what kind of fence they can fence off so that it does not contradict the rules. How high can a fence be placed and what should it be made of. The best option in this case is to use a mesh for fencing. Or make a decorative living fence of climbing plants. The main thing is not to forget that there should not be a deep shadow from the fence, which naturally the neighbors in the dacha will not like, since horticultural crops will grow poorly in this place.

With six acres of land, it becomes possible to realize your dreams of a real summer cottage. Six acres can be turned not only into a simple piece of land with different plantings, a competent owner can put up an excellent house and turn a summer cottage into a real vacation spot. If there is property, then it needs to be fenced off. You need to understand that a dacha is a place where you spend summer weekends and several holidays a year. Therefore, it makes no sense to spend a lot of money on the construction of a fence.

In our article, the main issue is saving money. This is a constant problem that the developer of the site has. The construction of a fence for a country house is no exception. But almost every owner wants the fence to be not only inexpensive, but also pretty and reliable. Will an inexpensive country fence be able to justify such expectations, and what material will the fence be the cheapest? Let's find out.

The first option would be wood. This material is the cheapest, its second plus is that it can be easily processed. The construction of a wooden fence will not be costly and time-consuming, so this option is one of the most popular. A wooden fence can be of various sizes, configurations, and it can also be painted. If you have a skilled painter, you can get a nice fence.

The disadvantages of such a fence are regular painting and the fire hazard of the fence.

Inexpensive wooden fence

The second offer is a chain-link mesh. A fence made of this material is easy to install, cheap, and does not require the same care as a wooden alternative. The peculiarity of such a fence is that it does not create a shadow. Such a fence is suitable for those summer residents who are going to grow climbing plants (ivy or hops). In this case, the grid will be an excellent basis for these plants.

Just like the wooden version, a chain-link fence is easy to do with your own hands. By the way, such a fence is not so easy to climb over, as it seems at first glance. If the mesh is not welded to the base of the structure, then under the weight of the attacker, it begins to sway, and the upper part can cause serious injury.

The disadvantage of the fence is the lack of shade and protection from prying eyes.

Chain link fence

PVC fence only recently began to enter the life of the CIS countries. PVC fences have many advantages. For example, such a fence is durable, can be produced with different colors and textures, the material is affordable and does not require maintenance. The PVC fence is not afraid of scorching sunlight, and the material is not afraid of either cold or moisture. In addition, PVC is easy to install and quite technologically advanced.

The main problem is the small amount of such material in hardware stores.

PVC fence

To date, material such as corrugated board, is just as popular for creating fences as wood. Decking is stable and durable. Such a fence does not need constant maintenance, and the noise level that penetrates from the street is significantly reduced. Perfect for summer residents who have a plot next to the road. Ingoda corrugated board is used as a temporary fence that stands during the construction of a house. You can read more about how to build a fence from corrugated board in this article.

The disadvantage of this design will be that the cottage will require pouring the foundation. And this is an additional cost that we want to avoid.

The cheapest fence for giving from corrugated board

We use unusual materials

If you set out to build an original fence, then you should think about such material as wattle fence. A wattle fence has long been a traditional fence for a Ukrainian village or village. It is created from support stakes and wicker vines. This design has an attractive and unusual look. There are also disadvantages - it is not difficult to get the material, but special skills are needed for weaving. Not everyone can weave such a cheap fence with their own hands. The strength of the wattle fence is low, and such fences are not subject to painting. You can read more about how to make a wicker fence with your own hands here.

wicker fence

Another interesting option is

stockade. Another decorative fence that is much easier to make than a wattle fence. Find logs with approximately the same thickness and grind them. Then you need to sharpen the tops. The work is not tricky, but laborious. But after spending a couple of days, you can get an original Slavic fence that will attract the eyes of other summer residents.

Log fence

How to make a fence from improvised materials with your own hands can be found in this article.

You can see photos of inexpensive fences for summer cottages here.

This article discusses options from which you can still make a practical fence for a summer cottage.

Consider the option of corrugated board

Now in the building materials market, many companies offer inexpensive and affordable corrugated board. However, this material has several types. Therefore, in order not to buy an expensive option, you need to understand it a little. It is necessary to take into account the strength of the future design. For example, if you buy the thinnest and cheapest corrugated board for the fence, then you will have to significantly strengthen the fence. Decking is of 3 types:

wall. This species has a wave height of up to 20 mm. Wall corrugated board can be used for sheathing the walls of buildings. Also, this view can be considered for a country fence. If you correctly install it, then the fence made of corrugated board will last a long time.
roofing. The second type has a wave height of 20 to 44 mm. It is used for arranging roofs of different levels. A universal look, so the price for it will be more than for a wall one, but it is the best option for corrugated board for fencing.
Carrier. The third type of corrugated board has a wave height of 45 to 160 mm. It is excellent for structures that use a solid load-bearing base. Also, the bearing corrugated board is used as a fixed formwork in various ceilings.

The video discusses the pros and cons of saving on corrugated board when installing a fence:

Wooden fencing: what could be cheaper?

The best option would be to purchase edged boards. Lumber must be cut into 180 cm - this is the standard value for the fence.

If you are going to make a fence entirely of wood, then you will fit in about 50-70 thousand rubles This is on a 6 acre lot.

Inexpensive edged fence

For installation you will need a drill. This tool will need to dig holes 50-80 centimeters deep. Next, the boards will need to be hammered with a sledgehammer by about 10 centimeters and covered with soil.

If you want to save money, then place wooden pickets at a distance of 2.5 meters from each other, and stretch a welded mesh between them. This combination of materials will significantly save your savings. The disadvantage of this design is an open area for prying eyes. But you will need to paint only the pillar boards, the mesh does not need maintenance.

Dacha is, first of all, its own land. Standard six acres of a summer cottage, make it possible to realize dreams of your own home. And, like any property, it is fenced off, separated from the rest of the space.

Most summer cottages are houses for seasonal living, so the construction of a capital fence is not advisable.

Saving money - this is the main issue that takes the developer when solving any summer issue. And the construction of a fence for a garden house is no exception.

But any private owner wants his fence to be not only cheap, but also beautiful and reliable. Will an inexpensive fence for a summer residence be able to meet these expectations?

Which fence is cheaper?

The cost of the fence is affected by the choice of its size and design.

A high fence, of course, will be more expensive than a low one, and a solid fence will be more expensive than a transparent one.

A fence that is attached to dug-in or concreted pillars will be cheaper than a fence mounted on a strip foundation.

Having decided on the construct, we proceed to the choice of material from which the fence can be built.

Options for inexpensive fences for summer cottages

Wooden fence

Building an inexpensive wooden fence is a smart option. It is inexpensive, beautiful and easy to install. There are several varieties of such fences.

Picket fence, board (edged and unedged).
Ranch fence.
Wattle (interlaced rods).

The most popular material for a country fence is picket fence. It consists of planks made of wood, with a thickness of 18 to 22 mm and a width of 7 to 14 cm. The height of such a fence can be selected in the range from 1.2 to 4 meters. For fastening the picket fence, horizontal beams are used, fixed on wooden (oak) metal or concrete posts.

The one who believes that a beautiful fence cannot be made from a picket fence is mistaken. There are many examples of original designs from this material.

The picket fence, fixed at an angle, forms an openwork fence

Estimated cost of picket fence - 700 rubles/m2. The final price of the fence depends on the chosen installation option. Installing a picket fence in a checkerboard pattern or herringbone pattern increases the price of the structure by 15-20%. The strip foundation, instead of simply driving the posts into the ground, adds 20-25% to the cost.

Fences made of thin wicker boards and a blockhouse are more expensive (from 1000 rubles / m2). A fence made of wicker boards attracts attention with an original look, and a blockhouse fence wins the hearts of summer residents with the quality factor of a wooden log house.

Wicker Board Fence

Wooden blockhouse fence

The fence called Ranch came to us from the Wild West. Its main feature is the use of wide horizontal boards or beams mounted on low wooden poles.

Ranch fence - cows won't get through, children will climb over

The obvious disadvantage of such a fence is the weak protection of the site from the penetration of unauthorized persons. It is quite understandable, since this fence was created for a vast pasture area. In terms of the cost of materials and work, the Ranch fence is comparable to the price of a picket fence.

Fans of the rustic style will certainly be interested in wattle - a fence assembled from hazel or willow branches. It is original, strong enough and durable. With a strong desire, the technique of weaving branches can be mastered with your own hands in a matter of hours. If you have no time to engage in manual creativity, then you will have to pay from 500 rubles per 1m2 for the manufacture and installation of wattle.

Anyone who is going to build an inexpensive fence for a summer residence, we advise you to pay attention to an unedged board. Having freed it from the bark, sanded it and opened it with varnish, you will get a beautiful fence for a summer cottage at the lowest price (450-550 rubles / m2).

Stuffing unedged boards with an overlap makes the fence very durable

Regarding the durability of wooden fences, the following should be said: the service life of autoclaved wood increases to 30 years. The service life of an ordinary, painted board does not exceed 15 years.

metal fences

Metal has always been more expensive than wood, but here summer residents can find acceptable options for themselves:

Rabitz.
Corrugated (woven) mesh.
Welded rolled and flat welded mesh (3D).
Euro picket.
Decking.

Chain-link mesh - a guest from Australia

The cheapest fence can be built from a chain-link mesh. It is available in different heights (1.0-3.0 meters), lengths (10-18 meters) and mesh sizes (20-100 mm). To protect the wire from corrosion, galvanizing and polymer coating are used.

You can put up such a fence by rolling out the mesh and fixing it to metal or concrete posts. The second option is the manufacture of mesh sections (frames from corners or pipes) and their installation on poles.

The durability of mesh fences reaches 30 years. They do not obscure the site and create a serious barrier to uninvited guests. The average cost of 1 m2 of a turnkey chain-link fence is 160-240 rubles/m2.

corrugated mesh

It was created not for fences, but for sifting crushed stone and gravel (screens). Corrugated steel mesh is made from bent wires using the perpendicular weave method. The main advantage of this material over the netting is higher rigidity.

The corrugated (kanilirovannaya) mesh does not come in rolls, but in flat sections measuring 1.75 x 4.5 meters. Having fixed it on the poles, we will get a high and durable fence. At a price, it is significantly more expensive than a chain-link (400 rubles versus 80 for 1m2). Savings on posts (the width of the section is 4.5 meters versus 2.5 m for the chain-link mesh) does not save the situation.

Welded mesh

Reasoning about which fence is cheaper drew our attention to rolled welded mesh. The estimated cost of a turnkey fence made of this material in 2016 is 400 rubles per 1m2.

Welded mesh 3D

Steel wire mesh (3D) has been very popular with summer residents in recent years. Anyone who does not like chain-link fences can order a fence made of this material.

The unusual name 3D is explained in two ways. First of all, it tells us that this mesh is not flat, but formed by a bent wire with a diameter of 3.5 to 5 mm. The second reason is a marketing ploy that fixes the material in the mind of the buyer due to the general enthusiasm for spatial technologies.

A welded 3D mesh is produced in sections, from 0.33 to 3.33 meters high and from 1.5 to 3 meters long. The cost of its turnkey installation is from 500 rubles / m2.

Euro picket fence

The habit of adding the prefix "euro" to the name of the material worked this time as well. At its core, it does not explain anything, but it sounds modern and beautiful. The popularity of wooden picket fences prompted stamped metal manufacturers to create something similar. The result is a very aesthetic and durable material.

In terms of service life, wood cannot be compared with it. In addition, a fence made of eurostudent does not require periodic tinting and antiseptics. The protective polymer film, which is used to cover galvanized steel, retains its color and integrity for 25-30 years.

Installation of a fence made of eurostudent, taking into account the cost of materials and work, is from 800 rubles per 1 m2.

The use of a euro picket fence of different colors and its non-standard installation make the fence attractive

Decking

The undisputed leader of the country "fence building". Reasons for popularity - affordable price, easy installation and durability. To this you can add a huge selection of colors and textured pattern of the profiled sheet.

Fence from a professional flooring with imitation of wood. Looks great, lasts a long time

Given the high demand for corrugated fencing, we will give several recommendations for the selection and installation of this material:

It is advisable to use corrugated board with a thickness of 0.5 mm. It is not much more expensive than 0.4 mm thick flooring, but it will not be covered with dents and will not lose its attractiveness.
If we take the distance between the supports at 3 m, then under the influence of wind loads, the fence canvas will begin to bend, and may lose its original appearance. Therefore, the step of the supports should be no more than 2-2.5 m, ideally 1.5 m.
It is necessary to dig in the pipes of the supports to a depth of at least 1.5 m, be sure to concrete them.
The fence post must be made of a pipe 60-80 mm, with a wall thickness of at least 2 mm.
It is necessary to take corrugated board with a double-sided, polymer coating, since galvanized flooring (without painting), in two years it becomes stained, loses its luster and may begin to corrode.

The cost of a fence made of corrugated board, excluding work, is lower than the price of a fence made of euro picket fence and is approximately 650-900 rubles per 1m2.

Plastic

When thinking about what is cheaper to make a fence from, do not lose sight of such a popular material as cellular polycarbonate. It is durable and beautiful, and framed with a steel profile, it creates a fairly strong enclosing structure.

Fence made of honeycomb polycarbate

There are two options for mounting polycarbonate: on steel logs (girders) or in profile sections. The first way is cheaper. Its price starts from 1000 rubles / m2. Installation on sections is more expensive (from 1500 rubles / m2), but allows you to get a more durable structure.

Slate

For the installation of the fence, you can use both flat and wavy asbestos-cement slate. The first is stronger because it has a greater thickness.

Slate fencing is characterized by high strength, resistance to frost and heat. It is more durable than wood and is not afraid of corrosion like metal. A significant drawback of slate is fragility. Another disadvantage of the slate fence is a nondescript gray look. It is easily corrected by staining with special paint.

The average cost of slate fences (with work) is 800 rubles / m2.

conclusions

The first place in terms of accessibility is occupied by chain-link fences (200 rubles / m2).

The third position can be awarded to fences made of corrugated board, slate, blockhouse and edged boards (700-1000 rubles / m2).

Fence Installation

In order for the fence to be quite inexpensive, it must be built with your own hands. The main points to pay attention to during installation:

The supporting structure of the fence is made in accordance with the weight of the fence canvas.
The basis of the supporting structure - the fence posts (more about the types of posts and their installation), must be securely deepened and fixed in the ground.
Depending on the filling of the fence, the pitch of the supports is determined.
Before installing the type of fence you have chosen, be sure to ask about the technology of its installation, consult with a specialist.

The fence has been installed, we are summing up the results: if you wish, you can always choose such a fence for the garden plot, which will be beautiful, reliable, and relatively cheap.

Updated article from 4.11.2016

DIY cheap fence

A reasonable owner of future housing sets out to save on such details. In addition, this is a completely justified and feasible solution.

Basic requirements for fences

cheap DIY fence

Materials for building a fence

We build a cheap fence ourselves

There are several basic materials that allow you to build an inexpensive and functional structure:

wood;
Rabitz;
corrugated board;
plastic.

Wooden fence: pros and cons

wooden fence

Advantages of wooden structures:

low cost;
the possibility of painting wood in any shade;
the possibility of erecting a structure of any shape and size.
cheap fence

Flaws:

relatively short service life of the coating;
difficulty in maintenance and operation.
wooden fences

Materials for installing a wooden fence

cheap wooden fence

It is best if the entire set of tools is collected in one place within reach to facilitate access to components.

Options for wooden fences

Construction of a wooden fence

Stage 2. We take a shovel and dig holes for supporting pillars.

Stage 3. Immerse the pillars in the ground by about one fourth of their length.

Stage 4. We put spacers to fix the pillars and fill the pit with cement mixed with sand.

Stage 5. We drive in transverse boards.

Stage 6. We vertically fix the picket fence on the transverse boards.

How to make a picket fence

Stage 7. We paint the finished fence in the selected color.

Painted wooden fence

On this, the construction of a wooden fence is considered completed. This is a relatively simple version of the fence, which is usually installed as a temporary option.

Chain link fence

Mesh fencing is considered to be the most economical option available today. Among the advantages of such fences should be noted:

weather resistance;
strength;
reliability;
ease of installation.
Chain link fence

Materials for building a fence:

supporting pillars;
grid of measured length;
cement;
sand;
fasteners;
twine.
Chain link fence

For those who stick to more original solutions, there are vinyl coatings, but they tend to lose color over time.

Construction of a chain-link fence

Mesh fence, diagram

Step 1. We markup.

Step 2. We dig holes for supporting pillars.

Step 3. We place the pipes in the pits.

Mesh fence - netting

Step 4. Fill the pits with a pre-prepared concrete solution. In some cases, builders simply hammer the pipes into the ground with a sledgehammer. This is possible if the soil is sufficiently soft.

Step 5. We begin to fix the grid. We fix the beginning of the roll at the first pipe, which acts as the beginning of the future fence.

Step 6. We stretch the mesh around the remaining supports, gradually fixing it. It is important to ensure that the mesh does not sag, otherwise all work will be useless.

We stretch the grid

mesh fence

Stages of work in the sectional construction of the fence

Step 1. Laying the foundation.

Step 2. We build a frame for tension from metal corners.

Step 3. We fix the corners between the supports.

Step 4 We fix the mesh inside the corners by welding.

Chain-link fences are very easy to erect without the help of specialists, which allows you to save a lot and try your hand.

Fencing from corrugated board

Corrugated fence

Modern construction markets offer corrugated board in various colors and sizes, so buyers should not limit themselves to fantasies.

As additional components, you should purchase anti-corrosion paint, supporting structures, logs, shovels, self-tapping screws, and also make a cement mortar.

Installation of a fence from a professional flooring

Cheap fences from corrugated board

Step 1. We carry out the markup for the future fence. It is important that the distance between adjacent supports does not exceed two and a half meters. Pegs and twine are used as auxiliary elements.

Step 3. We install support pillars at the corners of the territory, and then around the entire perimeter.

Step 4. We strengthen the base of the pillars with cement.

Step 5 We install the logs that are necessary for further attaching the corrugated board.

Step 6 We fasten the sheets to the logs using self-tapping screws.

Step 7. We paint the metal elements with enamel. In some cases, a primer is used.

plastic fence

Fence from plastic bottles

The positive aspects of such fences are as follows:

strength;
durability;
ease of installation;
low cost;
nice appearance.

Installing a plastic fence

Do-it-yourself polycarbonate fence

Polycarbonate fence

Stage 1. We carry out marking on the territory where it is planned to put a fence.

Stage 2. We mark the places where the gate and gate will be.

Stage 3. In established places, we drive support pillars into the ground.

Stage 4. In the corners we fix piles made of durable metal.

Stage 5. We stretch the piles around the perimeter of the site.

Stage 6. We fix the pillars with spacers.

Stage 7. We attach the sections between the supports.

Polycarbonate fence

In this article, the easiest ways to build fences were considered, the choice of which is determined only by your preferences. Now you can build a cheap fence with your own hands.

Video - Construction of a wooden fence

Video - Construction of a mesh fence

Video - Installation of a corrugated fence

Video - Installing a plastic fence

What is a fence for? What functions does it perform? How important is the quality of the fence to you? Is it possible to install a fence in the country with your own hands. so cheap and beautiful?

One of the main functions of the fence is the protective function and security! Remember how, without having time to acquire your summer cottage, you immediately came up with the idea that it would not hurt to fence yourself in and, thereby, secure your rights to the newly acquired plot. The second thought that came to you was a picture of your site, enclosed by a beautiful fence. All sorts of fruits and vegetables, flower beds quietly grew on the site - and all this without the danger of being collected by "night guests", who often make their "ruinous" visits to poorly protected areas.

Your initial wish was very correct! You definitely need to put a strong and reliable fence around your site. Will you be building, or will you be engaged in gardening and horticulture - the fence will protect and keep your valuables from the “envying eyes” and “grabbing hands”.

Once the decision has been made, it's time to take action! But ... in the modern market there is a great variety of all kinds of fences! Some require considerable financial costs, others require certain knowledge, others require experience, and others require a neighbor who has the same ...

What to choose? Which fence is best?

This question is not easy to answer! Each fence has its own advantages and disadvantages. We will now try to describe in more detail the most popular fences, so that each of the readers can make a choice for themselves.

By the way, if you, the reader, do not belong to the number of happy owners of fat wallets, then this article will help you decide and put up a fence around your site yourself! This activity is fascinating, during the installation process you will learn many new skills, learn some tricks and subtleties! Self-education is always good! Another reason to raise your self-esteem and test your self-respect! A self-made fence will be proof of your thriftiness.

First of all, fences are solid capital and lattice decorative. Some completely close everything that happens in your yard, while others allow you to see everything, but do not allow inside.

What are the fences in our time?

Wood;
From concrete slabs, solid and decorative;
Plastic;
Brick;
Grid;
From corrugated board.

Let's take a closer look at each type of fence and how to install it yourself.

Do-it-yourself wooden fence in the country, photo

Wooden fences are very popular, they are easy to install and carry out repairs. Let's get acquainted with the advantages and disadvantages of such a fence.

Advantages of a wooden fence:

Relatively inexpensive;
A wide variety of shapes and models;
Easy to install, even an amateur can handle it.

Flaws:

Requires constant personal care (painting);
Short-lived, service life rarely exceeds 10 years.

To install a wooden fence with your own hands, you will need the following materials and tools:

Hammer, nails;
Level;
Pegs and rope;
Wooden or metal posts;
cement mortar;
Wooden bars 2-2.5 m long;
Stafetins made of wood of the shape you like;
Lacquer, drying oil, paint;
Hinged hinges;
Latch or lock on the gate.

In order to purchase the material necessary for construction, you can contact any hardware store, where you can choose the shape and dimensions of the blanks you like. The most suitable size for future staples is 85 x 145 mm. This option is less time-consuming, but more costly in finance. If you want to save a little on a fence for a summer cottage, then contact the timber warehouse, where you will be offered a cheaper product that requires additional processing - a cut board. True, you will have to tinker with it a little - plan it, go through a grinder - but it will be possible to save a lot.

For columns, it is desirable to use metal pipes, a channel, but if this is not possible, wood treated with special mixtures will also come off to prevent early decay.

Whatever material you purchase, be sure to properly proliferate and dry it! The service life of your wooden fence will depend on this.

All materials are ready, where should I start?

To get started, mark the border along which your fence will pass with the help of a peg and a rope. Pull the rope evenly around the entire perimeter of the future fence.
Decide where the gate will be located, its dimensions, mark the location of the columns.
Mark the location of your posts at a distance of 2 - 2.5 m from one another. Dig holes for posts at least 30 cm deep.

Install and dig in the posts, while be sure to set the posts strictly according to the level - they should stand straight and not fall to one side. If desired and possible, you can concrete the posts, so they will last much longer.
For each column at the top and bottom, we fasten bars with a cross section of at least 50 x 50 mm with self-tapping screws.
Between the posts above and below we lay the crossbars and screw them on both sides with self-tapping screws or nails.
The turn came to the prepared skeleton to nail the crossbars. The distance between the staples can be at least 1.5-2 cm, however, if you want to make this wooden fence solid, nail one board close to the other.
When your fence is already fully installed, you should start painting it. To do this, once again treat all the wooden elements of the fence with drying oil, and after it dries with varnish or paint.

For a richer color and to enhance protection from natural elements, paint over the fence 2-3 times. This will extend its service life.

Video: Overview of fences. Homemade wooden fences

Concrete fences for a private house

Concrete decorative fence in the last decade has gained immense popularity. The reason for the increase in popularity was the invention of collapsible structures that are convenient for transportation and installation. Designers have improved these concrete structures and filled the markets with all sorts of models of such fences. Such fences are ideal for both industrial enterprises and the private sector (houses, summer cottages).

Advantages of a concrete fence

unpretentious;
Long service life - more than 100 years;
Easy and quick to assemble;
Affordable price;
Variety of models.

The disadvantages of such a fence:

It is difficult to carry out all the operations for assembling the fence on your own; during delivery and installation, the help of 2-3 people will definitely be required.

Types of concrete fences:

Sectional typesetting - widely used for fencing private houses, they are diverse. They are assembled from small sections that are inserted into the grooves of the posts. Everyone can choose for themselves the height of the fence and a certain model. There are openwork sections, lattice and solid. 2-3 people are enough for assembly;

Self-standing - more often used for fencing industrial facilities, they are a huge solid wall, with a large ornament. Such a fence completely hides from prying eyes everything that is on the other side of it. The peculiarity of an independent fence is that each section has its own support and does not need poles at all. The downside is that when installing and dismantling it, you can’t do without a crane.

Having decided to install just such a fence on your site, take care of airing the site. If you decide to fence yourself tightly, then the entire ecosystem of your garden may suffer from such a decision. Without regular ventilation, the soil becomes acidic, overgrown with mosses, and trees begin to rot. The situation will be saved by several lattice or openwork sections.

Installation of a concrete fence

Marking the future fence with rope and stakes will help you clearly define the scope of work, calculate the required number of sections, and mark the places for future posts. Each section is 200 cm long, so the distance from one post to another will be 205 cm. Mark the place for the posts with stakes, and use a rope to check how even your fence will stand.

Unloading building materials. Sections of concrete fencing have a weight of about 70 kg. The pole itself weighs 90 kg. When unloading, it will be very important for you to take this into account and take measures to facilitate the stacking process. If you lay out sections and posts along the entire working area (future fence), then you will significantly reduce both installation time and physical activity.

Installing columns. This system does not require foundation pouring. Initially, the very first pillar and the very last are installed. After that, they dig in all the subsequent ones, strictly in the intended places. If the terrain is uneven, then the height can be adjusted using the height of the posts.

Sections are installed in special grooves located on each column. The lowest layer from below can be overlaid with roofing material.

If desired, the finished sectional fence can be painted in any color using special compositions for facades for painting.

DIY brick fence, photo

Despite their high cost, brick fences are still very popular. A very large assortment of bricks encourages the construction of more and more new designs that emphasize the dignity of each brick.

Advantages of brick fences

Strength;
Reliability;
Durability;
Fire resistance;
The beauty;
Fundamentality.

Now it is customary to select a brick for a fence, under the brick from which the house is made - one complements the other! The fence can be solid and with forging elements, gratings - everything is at your discretion.