In furniture production, MDF and chipboard are considered the most popular materials. Their characteristics are largely similar, but there are some differences. It is not surprising that when buying these materials, many people think about how chipboard differs from MDF, which is better. To answer this question, it is necessary to understand in more detail the qualities and method of production of each of these materials.
Manufacturing features
MDF is an abbreviation that refers to the fine fraction of wood. This material is for the manufacture of which fine fraction sawdust is used (almost Usually it is logging waste. The raw material is crushed, steamed, thoroughly dried and glued. SoHow is MDF different from chipboard?
Chipboard is a chipboard, for the production of which sawdust of different fractions is used. They are mixed with synthetic or and pressed at high temperatures. A large number of resins negatively affects the environmental friendliness of the material. The advantage is that it is close to the density of natural solid wood.
How does MDF differ from chipboard in appearance
Many believe that these two building materials are similar not only in production, but also in appearance. This is not true.
The finely dispersed fraction of a tree has the following characteristics:
the surface of the plate is flat, smooth;
when studying the cut, one can note the uniformity and fine-grained structure of the material.
It also has distinct characteristics:
the surface is uneven, slightly rough;
at the saw cut, you can see pieces of chips and looseness of the material.
Differences in use in furniture production
For those who are going to use these materials to assemble cabinets, beds or decorative interior elements, it will be useful to knowWhat is the difference between MDF and chipboard in furniture.
The finely dispersed fraction is easy to cut and process. Screws can be screwed in without much difficulty. Ideal in cases where curly cutting is necessary - the cut is perfectly even and neat. At the same time, the material is heavy and has a different color on both sides (one side is white).
Chipboard is more capricious in processing. Saw cuts often turn out to be sloppy, “torn”. When screwing in screws, chips and cracks may appear. The advantage is that the weight of the material is light and the sides have the same color.
Furniture makers are also familiar with another material - chipboard. This board, in fact, is the same as the chipboard, only slightly improved. The surface of the plates is covered with a special facing film. This cover is made from paper and melamine resin.
The film is literally pressed into the surface of the plate and gives the finished products increased strength and protection from moisture. The only drawback of this material is the high cost.
How to choose
Based on the characteristics of all these building materials, one can ask a quite reasonable question:How is MDF different from chipboard?and for what purposes it is worth buying each material.
The finely dispersed fraction of wood is suitable for the manufacture of:
interior door panels, platbands and boxes;
decorative overlays on entrance doors and platbands;
interior partitions;
cabinet furniture (even for rooms with a high level of importance).
Chipboard will be an excellent solution for:
assembly of cabinet furniture;
finishing works;
interior partitions;
floors.
At the same time, vulnerability to a high indicator of humidity is considered a significant drawback. Laminated chipboard will be able to cope with this task.
So, the difference in the materials used and production methods affects the performance of the boards. That is why the same product made of chipboard and fine fraction will look different and require special care. When choosing a particular material for a particular purpose, you need to take into account all thatHow is MDF different from chipboard?: weight, processing method, interaction with moisture.
It means drawing up a project for the specific wishes of the client, for a specific interior (or housing in general) and the size of the room. In addition to design, the client also chooses the materials from which the kitchen will be made. The case and internal parts of the kitchen are usually made of chipboard. The front part (doors) can also be made of chipboard, but MDF is a more suitable material for this. Let's take a look at why.
chipboard– laminated chipboard (i.e. made from sawdust, and covered on both sides with plastic with a decorative layer). The advantages are low cost and good physical characteristics.
MDF- is an abbreviation from a foreign language, which stands for "medium density fibreboard". MDF is even more wear-resistant compared to chipboard, and has a number of significant advantages in terms of design.
A kitchen with laminated chipboard facades, as a rule, is cheaper (sometimes at times) than a kitchen with MDF facades. In kitchens with fronts made of chipboard, showcases with glass are very rarely made, since many manufacturers do not cut showcases in chipboard. This is due to the lack of equipment for this. And if you make a drink with an ordinary electric jigsaw, then chips will inevitably form, which is unacceptable. Facades are made from slabs by sawing. At the ends of the sawn parts, you can see the same laminated chipboard - chips. To decorate this end, an edge is glued to it: paper or plastic. Naturally, a kitchen with laminated chipboard facades is an “economy” option and will not serve you for many years, but if the budget does not allow you to buy a kitchen from MDF, then pay attention to one very important thing. The edge covering the end face of the laminated chipboard facade must be plastic. Also regarding the facades, it should be noted that they need to glue the edge with a thickness of 1 or 2 millimeters. 2 mm is preferable because the edge is thicker and more glue is applied to stick it, which means it will hold better. Subject to these rules, a kitchen with laminated chipboard facades will last you a year or two longer. Also, to increase the service life of laminated chipboard facades, they can be rolled into an aluminum U-shaped profile. It will come out a little more expensive, but it's worth it - the metal is much more durable and stable.
MDF material is environmentally friendly, has a uniform structure and is easy to process. Thanks to these properties, it has firmly gained popularity as a front part of cabinet furniture and, in particular, in the front part of the kitchen. Among the advantages of MDF is that this material is cheaper than natural wood, although it has almost the same characteristics. Milled, processed MDF can be faced with decorative PVC film, hard plastic, veneer or enamel paint.
- PVC films can imitate a wood structure, leather, stone, can have a plain decor, etc. Films can be glossy, matte or with special effects (for example, metallic or chameleon). Samples of film decors (originals) must be with the designer. Wood-like decors of PVC foils allow you to create a classic style kitchen at an affordable price. Monochromatic films fill modern and high-tech styles.
- Hard plastic has an enviable wear resistance, heat resistance and unpretentiousness. Ideal for a family with young children, or for those who do not want to waste precious time on kitchen furniture. In addition, plastic facades look quite beautiful, and are lined with an aluminum profile in standard, gold and wenge colors.
- MDF can also be coated with enamel paint on professional equipment. Painted MDF is devoid of such shortcomings as film lagging, but is afraid of aggressive detergents. Painted MDF can only be washed with a soapy raster. You can make a matte (also called semi-matte) color of the facades, you can make it glossy (shiny), or with special effects. Painted MDF is usually more expensive than film or plastic MDF, but it is also more durable.
- A veneer is a thin cut of natural wood. Veneered MDF looks very respectable, and due to the fact that it is not an array, it allows the use of rare elite wood species at an affordable price. Veneered MDF fronts are also available in matte or glossy finish.
Summing up, let's remember that a kitchen with laminated chipboard facades is an option for a austerity regime (maybe if you need a kitchen not for a long time). - This is a quality option, and the choice of material for MDF cladding depends on your needs. In any case, understanding the basics will allow you to choose the best option for materials, as well as the price / quality ratio.
When choosing the environment for your home, it is important not only the external design of the products. And the composition of the furniture is no less important. Chipboard is a chipboard that is hidden under the laminate of your furniture, no matter what it is outside: alder; nut; wenge. Inside under the coating of the laminate layer there will always be chipboard. Which is better - MDF or chipboard? Let's figure it out.
Pros and cons of chipboard body material
The advantages of LDSP are as follows:
- quite inexpensive in cost;
- covered with many types of laminate;
- endurance to the influence of high temperature;
- it is very easy to process in the manufacture of cabinet furniture.
The disadvantages include:
- strong friability of matter;
- poor retention of self-tapping screws, especially when reused;
- nails are practically not held inside the slab;
- service life is not more than 10 years.
In the manufacture of this building material, the presence of substances in the composition of the chips is permissible, which emit formaldehydes in a moderate amount. They are quite harmful to humans.
This modern material is produced in large factories from wood shavings. It is ground and mixed with resin. Subsequently sawn in the form of plates.
Which is better and stronger for beds, cabinets, laminate and other furniture
Place the panel on a flat surface before you start gluing. Chipboard must be free of dust and other possible contaminants. Clean up with a grinder. The film is gradually removed from the base. Apply gently and smooth to there are no air bubbles under the film.
Photo printing can be successfully applied to laminated chipboard. It looks very impressive.
Small chips of this material are more like cardboard. It is made by pressing fine wood dust. Mixes with resins and glue. One side is laminated. The other, wrong side, is covered with glossy plastic, paint or various kinds of films.
Advantages fine dispersion fraction ( mdf):
- the dose of formaldehyde is minimal, within the normal range;
- more plastic, which allows you to make furniture in different versions;
- in the manufacture, carbamide resins modified with melamine are used, which brings the material closer to wood;
- material can be moisture resistant, unlike chipboard, which strongly draws moisture. all about moisture resistant mdf for walls;
- characterized by comparative strength.
For the kitchen, it is necessary that the material is not only beautiful, but also practical. Matte painted facades from Italian designers are in fashion now.
Ultra interesting design options are now being created with matte fronts. Gloss is easier to maintain. It shows less contaminants. For practical people, it is better to choose furniture from glossy MDF panels. Using the advice of designers, you can successfully purchase furniture.
Choosing furniture from chipboard and MDF, the difference will be in cost and quality. However, both panels can be successfully used if you need to purchase budget furniture.
What is the difference between furniture in the nursery from MDF and chipboard
For the successful organization of a room for babies, it is important to take into account the advice of doctors. When the baby has grown out of his cozy bed. It's time to take care of the arrangement of space in his room.
For this you need pick up furniture, which will be:
- comfortable;
- comfortable;
- safe.
The grown-up baby already needs:
- a table at which he will create the first masterpieces of his work, and later - to do his homework;
- comfortable bed;
- wardrobe with drawers for clothes and toys.
All furniture for a children's room should be made of environmentally friendly materials. In addition, you can not put furniture in the child's room if the baby has an allergy to one of the materials from which it is made.
The first thing you need to pay attention to when choosing furniture for a nursery is the quality of the furniture. Products must be certified. The quality must be factory-made. The more modules, the more opportunities to create the perfect children's room with areas for relaxation, games and activities.
It is necessary that all furniture is suitable for the child's age. So that he can get his things or toys from a closet or table.
The chair and table should be such that the posture of the baby develops correctly.
If the size of the children's room does not allow you to place full-fledged furniture, the solution will be to purchase modular furniture - a transformer. For example, choosing a bunk bed helps create a personal space for each of the children. It can be fitted with a box for linen and a wardrobe.
Do not clutter up the room with unnecessary pieces of furniture. Only the necessary things. If you choose the right furniture, children will feel happy and try to complete tasks in a timely manner.
Environmentally friendly materials for facades and cases of products:
- chipboard;
- natural tree.
E1 is the highest security class of chipboard. If furniture for children is made from this sheet, you don't have to worry about the quality of the panels. Such material is moisture resistant. It is perfect for furniture frames and shelves. Covered with chipboard pvc film.
For the manufacture of furniture doors, MDF is better suited. This material is durable and wear resistant. Not afraid of moisture, does not deform over time. Resistant to scratches and dirt.
What to consider when choosing furniture for the kitchen from MDF and chipboard
If the kitchen is spacious, choose a large table. It can be placed in the center of the room when guests arrive. Several chairs can be placed around the table. It is good to choose oval or round tables.
Table models should be combined with the style of other kitchen furniture. For small rooms, a transformer is well suited. It doesn't take up much space when folded.
All materials from which the furniture is made must be resistant to steam and moisture. For such furniture, choose only high-quality materials - chipboard or mdf.
So that they do not deform over time. By choosing glossy surfaces, you can ensure a minimum of cleaning worries. On such furniture, stains from grease and other contaminants will not be visible. Matte surfaces are more whimsical, although they are in fashion today.
Simple tips for choosing a kitchen to order.
findings
The material from which the furniture is made is also important for choosing furniture for the kitchen. The tabletop can be made of natural wood, stone and MDF. The cost of the latter material is much more affordable.
So, in order not to guess which material is better, choose a combination of chipboard and MDF, combine these surfaces and equip your home to the delight of yourself and your loved ones.
Modern materials used in furniture production are very diverse and allow you to create furniture of very different quality and appearance. The most common materials today are chipboard and MDF. Let's see what are their differences and what is better for you when choosing furniture.
Chipboard is a chipboard. Sheet material, for the production of which fine wood particles are mixed with a binder (resin) and pressed in a hot way.
Chipboard - laminated chipboard, the surface of which is lined with a special film of thermosetting polymers. At first, this film looks like ordinary paper, which is impregnated with melamine resin, then, by means of pressing, the film is “tightly” connected to the chipboard surface. Thanks to such cladding, the appearance of chipboard is greatly improved, reliability, wear resistance, resistance to chemical attack, moisture, and low temperature increase. Since the coating limits the evaporation of harmful vapors of substances contained in chipboard, laminated chipboard is more environmentally friendly for others.
There are many variations of slab covering structures. Chipboard can be smooth and embossed, that is, imitation of the structure of various materials on the surface of the plate: wood, shagreen, etc. A huge number of color options are also possible: various types of wood, all kinds of background textures, metallic colors and just different colors. Due to the ease of processing and the huge range of chipboard has become almost the main material in the manufacture of furniture.
MDF (fine fraction) is a board material produced by dry pressing of fine wood chips at high pressure and temperature.
This material arose due to the improvement of technologies in the manufacture of fiberboard. MDF does not use additional synthetic binders. The natural material lignin, which is part of the wood, acts as a binder. Therefore, MDF is an environmentally friendly material.
During the production of MDF, special properties can be imparted: fire resistance, biostability, water resistance. MDF is used in the production of both cabinet, kitchen and office furniture, as well as non-standard furniture, commercial equipment, and doors.
MDF is also a high-tech material. Its surface is very easy to process, and MDF parts can be given the most diverse and unusual shapes. MDF is easily painted and laminated, laminated, molded, suitable for thin veneer veneer, imitation printing, varnishing and enameling. And MDF with frequent milling grooves bends well. It also has a high level of sound absorption and sound insulation, and also has excellent thermal insulation properties.
For convenience, you can compare the main properties of chipboard and MDF in the table:
| Indicator | chipboard | MDF |
| Surface: | Laminated | Many ways of processing - painted, covered with plastic or film, laminated, etc. |
| Possibility of fine processing: | Absent (it is impossible to make deep milling, complex figured parts) | MDF parts can be given the most diverse and unusual shape. |
| Strength: | Resistance to a variety of mechanical damage | High material strength (superior to natural wood) |
| Environmental resistance: | Great thermal resistance | Great resistance to moisture, fungi and microorganisms, high temperature steam |
| Colors and textures: | A wide variety of colors and textures | |
| Price: | Medium | High |
| Environmental friendliness: | Medium | environmentally friendly material |
| Flaw: | Impossibility to produce curved facades | Standardized dimensions of facades (expensive custom-made sizes) |
And here are a few more terms that are useful to know when choosing furniture:
Fiberboard - fibreboard - a sheet material that is made in the process of hot pressing a mass of wood fibers formed in the form of a carpet. These fibers are obtained by steaming and grinding wood raw materials. They are individual tissue cells, their fragments or groups of wood cells. The raw materials are sawmill and woodworking waste, technological chips and firewood. To improve the performance properties, hardening agents (for example, synthetic resins), water repellents (paraffin, ceresin), antiseptics, etc. are added to the mass. headboards, partitions. They are also used in the manufacture of bent glued parts with outer layers of sliced veneer of valuable species.
MELAMIN is a decorative coating resistant to water and mechanical damage.
PVC - polyvinyl chloride, a synthetic material obtained from natural products: petroleum products and ordinary table salt. It has high strength, economical, versatile in use. Recognized as environmentally friendly.
TEXTURE - the nature of the surface of a material, due to its internal structure, structure. Texture is perceived visually and tactilely. The longitudinal section of the tree shows its fibrous structure, and the transverse section shows the structure of growth in the form of annual rings. Texture is determined by the objective physical and chemical properties of the material, and this, to a large extent, differs from texture, which largely depends on the individuality of the artist who creates it.
INVOICE - the nature of the surface. The texture is felt visually and tactilely. The perception of texture depends on the characteristics of nature, on lighting, and in many ways differs individually from the texture of the same surface. In a figurative sense, texture is an individual handwriting. Thanks to the harmony of colors and the fact that each of them correctly correlates with the general tone, the correct image of the material is obtained.
FACADE - frontal part of furniture, cabinet doors. Often the headsets of the same factory differ from each other only in the design of the facades, and the cabinet bodies are the same.
ACCESSORIES - handles, latches, locking mechanisms and other devices that ensure the opening of the doors, their fixation in any position or locking.
VENEER - a thin cut (sheet) of natural wood. Of course, natural wood and solid wood furniture are very beautiful, but, like any material, it has its drawbacks. The array is expensive, subject to a change in linear dimensions at different humidity, even if it was previously thoroughly dried and varnished. Veneer finishing of furniture parts or surfaces is a way to make it cheaper and more affordable, while maintaining the attractiveness and nobility of natural material.
Today, for the production of furniture and decorative coatings, various materials are used - chipboard, fiberboard, MDF, solid wood. However, more and more manufacturers prefer to deal with chipboard. At the same time, many buyers are still confused by the abbreviation chipboard: what it is, how this material differs from the varieties mentioned above, and what are its advantages and disadvantages. The answers to these questions will be provided in this article.
You can see the similarity of the terms chipboard and chipboard. The latter stands for chipboard or chipboard. The abbreviation itself, although common, is not entirely correct. It would be more correct to write chipboard. This is a composite material, in the production of which, due to hot pressing, sawdust and shavings, together with binder formaldehyde resins, take the form of a single web.
For the first time this material was invented in the 30s. of the twentieth century, but mass production of chipboard began only in the 50s. Last but not least, this is due to the difficult post-war situation. For the needs of mass production, cheap and affordable material was required, and natural wood was expensive and the waste during its processing reached 60%. In addition, the tastes of buyers have changed significantly - pretentious bulky furniture in no way corresponded to the spirit of the era, which combined the desire for simplicity, convenience and lightness with the need to save money. Chipboard fully met all these requirements.
Chipboard production technology
For the production of chipboard, waste from the woodworking industry and specially crushed illiquid trunks are used:
- shavings and sawdust (previously they were simply burned as garbage) are dried in a special drying chamber and driven through a cycling plant that rejects particles that are too large for re-grinding;
- raw materials that meet the requirements are mixed with formaldehyde resin and transferred to a conveyor belt, where they are given the required shape by cold pressing;
- using a hot press, the layers of the workpiece are firmly glued together, then the sheets are cooled, dried and sawn into plates of standard sizes;
Pros and cons of chipboard
The resulting durable and very affordable material instantly found application in the manufacture of upholstered and cabinet furniture, carriages, in construction (as formwork, partitions, beams, floors, skins, frames). Among its advantages, good indicators of heat and sound insulation can be noted.
Durable and inexpensive chipboard is used as partitions, floors, cladding, formwork
However, chipboard also has a number of serious drawbacks. It can absorb moisture (up to a third of its original volume) and deform. The plate can also lose its shape under the influence of heat. This limits the possibility of using chipboard sheets in the kitchen or bathroom. The only exceptions are canvases that have undergone special processing, as a result of which the material becomes moisture and fire resistant.
Due to its dense structure, chipboard holds nails and screws well. However, due to the same structural features, the fixing hardware cannot be reattached as the slab will begin to crumble. For the same reason, the material is not suitable for milling and creating curved contours.
And, finally, the most disadvantage of chipboard boards is the use of urea-formaldehyde and phenol-formaldehyde resins in the process of their manufacture. They prevent the processes of decay of wood, however, far from the most favorable effect on human health.
Note! Formaldehyde is an extremely dangerous chemical. It can accumulate in the human body, cause poisoning or provoke the development of serious diseases. The main signs of poisoning are cough, irritation of the mucous membranes of the throat and eyes, dizziness, fatigue .
The main types of chipboard
There are several classifications of chipboard.
The amount of a harmful substance in particle boards is indicated by the formaldehyde emission class E1 and E2. E1 class is considered to be environmentally safer (corresponds to GOST 10632–89 adopted in Russia). Class E2 is not suitable for use in children's rooms. Many European manufacturers have already ceased production of this class of chipboard.
Depending on the quality and appearance of the finished product, chipboard can be:
According to the type of cladding, chipboard is distinguished:
- draft (do not have lining);
- laminated (coated with a melamine film or a special resistant varnish);
- veneered (they have a lining in the form of a thin sheet of natural wood).
To figure out which is better - chipboard or chipboard, you need to familiarize yourself with the characteristics of laminated panels.
LDSP: what is it, variety of colors
So what is LDPS? In fact, it has already been discussed above and the decoding of chipboard is simple - it is a laminated chipboard. For the manufacture of laminated chipboard (more precisely, laminated chipboard), only high-quality polished chipboard is used.
At the final stage of production, they are covered with a special polymer film at high pressure and high temperatures. This film is made from paper impregnated with melamine resin. Sometimes, in the manufacture of expensive LSDP, a special varnish is used that is not afraid of water and scratches.
Characteristics and main advantages of the material. Areas of use. Features and installation rules. Average cost of production.
Catalogs with samples and photos of laminated chipboard, the colors of which are represented by hundreds of shades, can show several palettes:
- plain smooth (vanilla, blue, green water);
- plain textural (aluminum, titanium, concrete);
- wood-like colors (maple, cherry, wenge);
- glossy decors;
- fantasy decors (various patterns and drawings).
All this makes chipboard sheets a versatile and extremely popular material. They are used in bathrooms and nurseries, to create decorative partitions, upholstered and cabinet furniture. You can easily find a lot of positive feedback on the forums: chipboard kitchens can withstand the effects of steam, water and significant temperature changes.
Laminated boards are perfectly combined with other materials - glass, mirrors, metal, plastic panels, as well as fiberboard and MDF.
Which is better: chipboard or MDF
The variety of materials in stores cannot but puzzle buyers. What is better for furniture - MDF or chipboard?
There are fundamental differences between chipboard and MDF. Chipboard is made from wood chips and sawdust, formaldehyde acts as a binder.
In the production of MDF, wood dust is used (waste of the woodworking industry crushed to a very fine fraction) and exclusively natural binders - paraffin and lignin. Thanks to this composition, MDF is much more environmentally friendly than chipboard. They can be safely used even for decorating children's rooms.
Note! Paraffin is not only environmentally friendly, but also has water-repellent properties, so there is no need to additionally treat MDF boards with special impregnations.
Unlike laminated chipboard, MDF is a very plastic and soft material. It is easy to mill, which is why it is so popular in the manufacture of luxury furniture. Most of the bent elements, carved headboards and intricately executed facades are made from MDF. Photos of beds made of laminated chipboard or kitchen facades cannot please with such decorative effect, because the furniture is made of a material with a crumbling edge, unsuitable for milling.
Nevertheless, many, choosing between chipboard or MDF, prefer laminated panels. The reason is simple: the cost of MDF is much higher than democratic particle boards. According to consumer reviews, chipboard furniture is successfully leading the domestic market, and last but not least, this is due to reasonable prices.
Another weighty argument in favor of laminated chipboard is the richness of color schemes. In the chipboard catalog or on the websites of online stores, you can choose the right shade or texture that will harmoniously fit into any style of interior - from classic to modern.
Leading manufacturersChipboard: Egger, Kronospan, Lamarty, Nevsky Laminat
When buying laminated chipboard, it is very important to make sure that the product has all the necessary certificates that guarantee the safety of the material for human health and is of high quality, ensuring a long service life. However, only large manufacturing firms can ensure that the norms and technical regulations are strictly observed at each stage of production. The leaders in the domestic market are foreign companies Egger and Kronospan, as well as domestic manufacturers Lamarti and Nevsky Laminat.
Chipboard Egger: colorsand material advantages
The head office of the company is located in Austria. Founded in 1961 by Fritz Egger Sr., the modest family business has gradually grown to become one of the world's leading chipboard manufacturers.
The highest quality of manufactured products, an extensive catalog of Egger chipboard colors and reasonable prices are achieved through the opening of local production facilities in 7 European countries, including Russia. First-class raw materials are mainly produced from coniferous wood and do not include foreign elements. Laminated boards fully comply with European safety standards.
A huge variety is provided by the Egger chipboard color catalog, which allows you to realize any design solution:
- plain chipboard (white, lagoon, alabaster, beige sand, canyon, pumpkin yellow, green water, Chinese red, reed, Baltic blue and dozens of other colors) - presented in matte and glossy versions;
- texture decors (lightweight concrete, beige leather, gray-white amalvi marble, titanium, bronze quartz, indigo quartz, etc.);
- LDSP Egger wood-like colors (pink Calvados, light venchester oak, flowering pear, natural rosewood, champagne cremona oak, havana zebrano, natural merano - more than 100 shades that perfectly imitate natural wood).
We can state a stable increase in demand for Egger laminated chipboard. Customer feedback only confirms the positive dynamics, while noting the high wear resistance of the material, excellent quality and the minimum presence of formaldehyde resins (“pine smell without chemicals”).
Chipboard Kronospan: high kaquality and rich assortment
Another Austrian company whose history began with a small family sawmill in Salzburg in 1897. Currently, its activities cover 24 countries of the world.
Among the undoubted advantages of laminated boards of this company are:
- good moisture resistance, which allows them to be used in bathrooms and kitchens;
- increased wear resistance;
- solid catalog of colors LDSP Kronospan;
- environmental friendliness;
- anti-static, guaranteeing additional protection against dust;
- fairly democratic pricing policy;
- long service life (up to 20 years).
The colors presented in the LDSP Kronospan catalog can be classified as follows:
- textures (deep pores, wood pores, office, smooth, shagreen, mother-of-pearl);
- plain (modra blue atoll, lime green, white facade, burgundy, Inca gold, lavender, viola);
- wood (chipboard Milanese walnut, snow birch, chipboard guarneri walnut, dark velveteen, light chipboard bodega, alder plank, rustic oak, warm ash shimo);
- fantasy (white sakura, white name, dark twist).
Even such a short review of the Kronospan laminated chipboard colors gives a good idea of how rich their palette is and how diverse the textures are. Actually, a surprisingly believable imitation of the rough surface of natural wood is a kind of hallmark of many chipboard lines from this Austrian company.
Lamartie: characteristicsChipboard, colors, photo with names
Thanks to strict quality control at every stage of production, laminated chipboard from the Syktyvkar plywood plant successfully competes on the Russian market with the products of foreign companies. Chipboards of this company are made from high-quality raw materials (coniferous and birch wood without foreign inclusions like bark), have an environmental certificate and excellent technical characteristics.
They are wear-resistant, not afraid of exposure to steam, moisture and high temperatures, environmentally friendly, durable and retain their original color for a long time, and the impressive Lamartie chipboard color catalogs will make any design idea come true.
Lamarti chipboard color catalog includes:
- solid colors (topaz, chili, serenity, coral, monsoon, lemon, sepia);
- textural decors (slate, titanium, chinon, aluminum, exotic pine concrete);
- wood imitations (plum, marsala oak, light chipboard wenge, latte, bamboo, noche amati, bleached oak, elm, chipboard Italian walnut);
- fantasy colors of LDSP Lamarti (linen, spring, Arabica flowers, modern, luino, graffiti).
Chipboard Nevsky Laminat: affordable price, European quality
Laminated sheets from the Nevsky Laminate Plant compare favorably with their foreign counterparts with their low cost. At the same time, they have all the necessary quality certificates and good environmental characteristics. Chipboards from this manufacturer hold fasteners well, are not afraid of moisture, are resistant to mechanical damage and are distinguished by a long service life.
The Nevsky Laminate chipboard color catalog offers customers a wide selection of shades and textures:
- plain (orange, lime, anthracite, yellow narcissus, wine red, dark chocolate, white pearls);
- textural (flax, titanium, aluminum);
- fancy decors (litera nero, newport, sena, titanium, flora verde, mocha stitch);
- wood decors (chipboard light shimo ash, Indian light ebony chipboard, French oak, Macassar, Swiss elm, Jarrah, Canterberry oak, caramel).
Regardless of whether the boards are produced in Europe or in Russia, laminated chipboard will be an excellent choice for many years to come due to the optimal combination of price and quality.
Loading...