Tomato sticks made of fiberglass reinforcement. New supports for tomato bushes made of fiberglass.... Greenhouse for a summer residence made of composite reinforcement

From this article you will learn in what ways you can tie up tomatoes in the greenhouse and in the garden.

To grow vegetables at home, you need to know all the details about each vegetable separately. In this article we will learn how to tie up tomato bushes and whether it is necessary to do so.

What are the modern methods and options for gartering tomatoes, and what can be used for gartering?

Garter of tomatoes to a trellis

We have already planted the tomatoes, and they have taken root; in order to have something to tie the bushes to, we need to drive wooden pegs or metal rods into the ground. Methods for gartering tall tomatoes there are:

• An individual peg for each plant, the height of the length of the plant, plus 25-30 cm for driving into the ground
• To the trellises
• To linear trellises
• Construction of a cage for each plant
• Construction of pyramidal or triangular caps for 3 or 4 plants at once
• Attaching the plant to the wire using hooks and rings

We installed pegs or other devices in the ground, and we will tie the plants to them. Suitable for garter:

• Strips of fabric, 3-4 cm wide
• Nylon tights or stockings
• Soft rope
• Plastic clips

Note. All thin and hard garter materials are not suitable - they can cut into the branches and trunk of the plant and destroy it.

Cannot be used:

• Fishing line
• Wire
• Threads
• Thin and tough rope

Important. If you take last year's garters, then before using them, you need to wash them with laundry soap to kill bacteria.

How to buy pegs, fiberglass reinforcement, plastic clips, stapler, device for gartering tomatoes in Aliexpress: links to the catalog

If you don’t have pegs or binding material, you can buy them at any time of the day in the Aliexpress online store, and. There is a wide range of products for gardening.

When and why should you tie up tomatoes in a greenhouse or open ground?

To get a high yield of tomatoes, you need to learn how to properly care for them, including tying them up. Tall varieties are tied up, and low varieties with a bountiful harvest. They are most often planted in greenhouses, less so in open ground.

Experienced gardeners advise tying up all low-growing varieties, because this way you can get a much larger harvest.

Tomato garter needed:

• To make it easier for plants to support the weight of the fruit, otherwise they may break.
• Tall tomatoes with fruits, if not tied up, will lie on the ground and rot or be eaten by pests, and to prevent this from happening they need to be tied up.
• Tethered plants are easier to pinch (remove additional shoots that may bear fruit).
• It is not advisable to pour water on the leaves and set fruits, and therefore you need to water the plants closer to the roots, and this is easy to do with tied tomatoes.
• It is also easier to fluff up the soil around the tomatoes if the plants are tied up.
• A plant positioned vertically receives more sun and air, and therefore the fruits will ripen faster.

Important. We begin tying up tomatoes 2-3 weeks after planting the seedlings in open ground or a greenhouse.

How to properly tie tall tomatoes in a greenhouse and open ground: 5 methods, rules, tips for beginners

Tying tall tomatoes

Some varieties of tall tomatoes grow up to 1.5-2 m tall. The stakes should also be of the same height. In open ground, plants of this height are planted approximately at a distance of 1 m. And they need to be tied up as they grow, 3-6 times per season.

There are 5 main ways tying up tall tomatoes:

1. Tying up to the pegs plants using fabric strips or soft rope.
2. Construction wire frame, cone-shaped, around the plant. The method is expensive if there are a lot of tomato bushes.
3. Tying tomatoes to the horizontal trellis. This is done like this: we drive high stakes along the edges of the bed with tomatoes. We stretch the wire between the stakes, starting from the bottom and up, every 30 cm. First, we tie the plants to the bottom wire, then, when they grow up, higher.
4. Tying tomatoes to the vertical trellis. This method is only suitable for greenhouses. We stretch a wire along the ceiling of the greenhouse, and the tomatoes are tied to it.
5. Tying tomatoes to the grid. We install a metal mesh between two posts and tie tomato bushes to it.

In the garden, you can tie tomatoes using all methods except 4, and in the greenhouse you can use 3 and 4 methods of tying.

How to properly tie up low-growing tomatoes in a greenhouse and open ground: 5 methods, rules, tips for beginners

Low-growing tomatoes in the garden can be tied, or they can be left to grow without support. Each case has its pros and cons. If plants grow without support, they take additional root, and the fruits on the ground can rot from moisture. So, experienced vegetable growers advise tying up low-growing plants. This can be done as follows ways:

1. The most popular method for low-growing tomatoes is tying to the posts, about 1 m high. We drive the posts into the ground 5-10 cm from the plant. We wrap the plant and the post with a strip of fabric or a soft rope in the shape of a figure eight, and tie the ends of the rope to the post, like a bow. The rope should be tied loosely and not cut into the plant.
2. Tying bushes to a low trellis. We drive low stakes, about 1 m high, along the edges of the bed with tomatoes. Attach a thick wire to the stakes on top. We tie each bush to the wire with a soft rope.
3. Devices in the form quadrangular cap. Around 4 tomato bushes we hammer 4 low pegs, which we wrap with wire: at the bottom, in the middle and at the top. The wire will support the bushes and then the fruits.
4. Devices in the form triangular cap. Near each bush we drive pegs into the ground and wrap wire around them in several places. The bushes are obtained in the middle of the triangle.
5. Net, about 1 m high for tying tomatoes. At the beginning and end of the bed with tomatoes we hammer in 2 columns. We attach a net to them, to which we tie the tomato bushes.

Video: How to tie up tomatoes? An easy way using a plastic bottle

How to properly tie tomatoes to pegs in a greenhouse and open ground: description of the method

In the garden, for gartering tomatoes, we first install pegs to each bush. They can be wooden or metal. We drive the peg into the ground 5-10 cm from the plant. It must stand firmly. With a soft strip of cloth or a soft rope, we wrap the peg and the plant in a figure eight several times and tie it to the peg, without pulling the plant to it, but so that there is free space and the plant can grow.

Video: How to tie up tomatoes in open ground

How to properly tie tomatoes on a trellis?

Tall tomatoes are tied to a trellis

We install trellises for tying tall tomatoes in a greenhouse or in a garden. This is done like this:

1. Along the bed with tomatoes, we drive iron stakes into the ground, about 2 m high, every 1.0-1.5 m.
2. Between the stakes, from the very bottom to the top, at a distance of 35-40 cm, we stretch a thick wire.
3. We tie each plant with a soft garter to a wire.
4. In addition, as they grow, we tuck the branches behind the wire.
5. When the fruits grow, we also tie them to the wire, or hook them to the wire.

Using this method, you can leave additional branches on the plant; the support is reliable and will withstand everything, and besides, the harvest will be larger, and in the greenhouse it is not scary if frosts begin.

How to properly tie tomatoes in a linear way?

Tomatoes tied to linear trellises

The linear method is used in the greenhouse and in the garden:

1. We drive stakes 2 m high in a straight line along the bed with tall tomatoes.
2. We stretch a strong wire at the top between the stakes.
3. We tie one end of a long soft garter on the plant at the very root, and tie the other end of the garter at the top with a wire.
4. We tuck the growing branches behind the garter and direct them upward.
5. We also tie large fruits to the wire.

How to properly tie tomatoes on hooks and chains?

Garter of tomatoes on hooks

The method of tying tall tomatoes on hooks is similar to tying them on trellises. Along the edges of the bed with tomatoes we bury 2 metal stakes, about 2 m high. We stretch the wire between the stakes. We tie a fishing line with a loop to the wire above each bush, and attach hooks to it. We cut the bicycle inner tube into thin rings. We thread the ring under a branch of the plant, bend it in half, and hook it to the fishing line. Hooks can be made from aluminum wire or bought in the online store.

How to properly tie tomatoes in a cage?

Garter of tomatoes in a cage

One way to tie up tall tomatoes is to build a cage for each tomato. We make the cage from 4 pegs; wooden or metal ones are suitable, depending on the height of the plant. We hammer the pegs around the plant and connect them together with wire in 3-5 rows at different heights, to which the plant is attached using a soft rope. We attach the grown plant higher to the wire.

How to properly tie tomatoes without stakes?

Tying tomatoes without stakes

In this method of tying tomatoes, stakes are still needed, but not for every bush. This is done like this:

1. We plant tomatoes in 1 row.
2. We hammer in 3 pegs on both sides of the row with tomatoes, the middle peg on each side is higher, and there are low pegs on the edges.
3. We connect the pegs around with a soft rope, it will act as a limit for the bushes.
4. In addition, we also connect high pegs with rope or wire at several levels in order to tie tomatoes to it.

How to properly tie tomatoes in a figure eight in a polycarbonate greenhouse?

Tying tomatoes in a polycarbonate greenhouse

The polycarbonate greenhouse is tall, it is heated, and in it you can grow tall tomatoes all winter long. You can tie them to trellises in a simple way - in the form of a figure eight or, as people say, with a bow. First, you need to tie the rope to the plant loosely so that there is free space near the trunk, and then tie the rope to the wire at the top without pulling it.

A polycarbonate greenhouse is large, and there is a lot of work in it; to simplify the work, you can purchase a special device similar to a stapler from an online store. The device works by tying the plant and the wire with a special tape and fixing them together. This way you can quickly tie up all the branches in a short time.

What is the easiest method for gartering a tomato?

The easiest way to tie tomatoes is to a peg

The easiest method for staking tomatoes is to stake each tomato. It can be wooden, metal or a piece of pipe. The height of the peg should be no less than the height of the tomato when it is fully grown, and about 30 cm additional for driving into the ground.
We drive the peg 5-10 cm further from the tomato bush. Then we lightly wrap the garter around the plant, twist the ends and attach it to the support. When the tomato grows, we tie it higher with another ribbon, or remove the one that was there and tie it higher.

This peg and garter method is only suitable for medium-sized tomatoes; a plant belonging to tall tomatoes may not be able to withstand such a peg, and the structure along with the plant will collapse.

How the Chinese tie up tomatoes: a description of the method

The Chinese have developed many drought-resistant tomato varieties that have proven themselves well in our country. Chinese technology for growing tomatoes also appealed to those gardeners who came across it. The Chinese's tying of tomatoes is also very original and fast. It consists of the following actions:

1. We plant tomatoes in a row with a distance of about 20-30 cm between them.
2. We hammer pegs between the tomato bushes.
3. We place the bobbin with the rope in our backpack.
4. We take 1 peg and drill a hole at the end of it so large that the rope can move freely.
5. We pass the rope through the hole in the peg that we have in our hand.
6. On the first peg, standing at the beginning of the row, 10-20 cm from the bottom, we tie the end of a soft rope.
7. Then the plants will be tied up automatically: we walk at the usual pace and direct the stick with the rope first to the bush, then to the peg, wrap it around it; We make movements with a stick as if weaving a basket. So we reach the end of the row of tomatoes.
8. Then we return, but now the rope should lie on the other side of the bush.

Video: Garter of tomatoes. Pro

How to tie up Bull's Heart tomatoes in a greenhouse and open ground: features, tips

Bull's Heart tomatoes

Tomatoes "Bull's heart" are tall. As seedlings, in a garden or greenhouse, we plant them at a distance of about 0.5 m, one plant from another. It is good to tie them to trellises with soft rope. Thick wire can be used as a trellis. The wire is attached to two iron stakes. We tie a rope to each bush at one end, and tie the other end of the rope at the top to a wire.

When the plants grow up and fruits begin to set, they also need to be tied to a trellis, otherwise the plants may not be able to withstand the heavy weight of the fruits, because one tomato of this variety sometimes weighs up to 0.5 kg.

How to tie cherry tomatoes in a greenhouse and open ground: features, tips

Cherry tomatoes

Cherry tomatoes can be grown in the garden and greenhouse. Cherry bushes are low, medium and high in height, depending on the variety. Low and medium-sized cherry trees do not need to be tied up, but tall cherry varieties can reach 2 m in height.

When cherry seedlings, planted in a greenhouse or garden, reach 30 cm in height, you need to install supports. Metal rods or, if there are a lot of plants, trellises are suitable for supports. Cherries continue to grow and need to be tied higher and higher.

In addition to eating them, you can decorate your balcony with cherry tomatoes if you buy decorative cherry tomatoes. We plant these tomatoes on the balcony in a hanging basket; when the fruits set, they will hang down beautifully, and so that the branches do not break off under the weight of the fruits, we will stretch a wire along the balcony and attach the branches to it.

How to make sticks and supports for tomato garters with your own hands?

Pegs for gartering tomatoes can be made from the following materials:

• Thick tree branches
• Wooden boards
• Long wooden planks
• Metal rods
• Long pieces of metal pipes
• Strong plastic sticks

To make it easier to drive into the ground, we trim the wooden stakes with an ax on one side. Metal rods and pipes are more difficult to install and require skill.

How to treat pegs for gartering tomatoes?

Tall wooden sticks are suitable for pegs. To prevent them from rotting by the end of the season, they need to be slightly burned over a fire or in an oven. Pegs treated in this way will be suitable for tying tomatoes for several years.

Do I need to tie up tomato bunches?

Tied bunches of tomato

Tomatoes of large varieties, such as “Oxheart”, need to be tied with a rope or hooked, otherwise the branch may not hold up and break. Some gardeners make their own hooks from wire and attach them to a branch to a trellis. But you can also order ready-made hooks in the online store, or.

What happens if you don't tie up tomatoes?

Tied tomato bushes bear fruit better

Tomatoes can be left untied in areas with a hot climate, even if they are low-growing. There the fruits lie on the ground, the days and nights in the southern countries are warm, they ripen quickly and do not have time to rot. But tall tomatoes will have to be tied up in subtropical countries.

And in temperate latitudes, where it is often cold for tomatoes at night, lying on the ground, they rot, they are eaten by pests, and so you can lose the entire harvest. Therefore, you need to tie up both low and tall tomatoes.

So, we learned how to tie up low and tall tomatoes, in open ground and in a greenhouse.

Video: Tying up tomatoes! How to properly tie tomatoes in a greenhouse and garter errors

What are garden pegs used for?

• Tall plants and plants in the process of growth definitely need support!
• In open ground, the support protects the plant from rain and gusts of wind; the support weighs down the branches and leaves of the plant.
• Pegs are also necessary for fruit plants: support pegs help the main stem not to break under the weight of the fruit, the load is distributed between the plant stem and the support.
• Obninsk Composite Materials Plant LLC offers composite garden supports (pegs) for plants of different heights from 0.6m to 2.0m.
• The diameter of the supports for each size is selected in such a way that the support can easily withstand the load from the tied plants.

  AND THE MOST IMPORTANT THING:

• For fruit nurseries, vineyards, greenhouses and organizations growing plants in open ground, we offer composite supports of any height and diameter at the lowest prices!

For which plants are composite supports (pegs) suitable:

• 0.6m / 0.8m high stakes are ideal for garters, roses, low-growing climbing plants, flowers, seedlings, seedlings.
• Pegs with a height of 1.0m / 1.2m / 1.5m are ideal for staking tomatoes, cucumbers, peas, and ornamental climbing plants.
• Pegs with a height of 1.5m / 1.8m / 2.0m are ideal for gartering currants, raspberries, blackberries, grapes, peppers.

Our plant supports (pegs) are ideal for staking and growing any plants!

Our garden stakes are made from composite materials. Unlike pegs made of bamboo, wood or metal, they have a number of undeniable advantages of use:

• Durability. Not subject to rotting (corrosion) - service life up to 50 years.
• Very strong and elastic! Participate in the natural growth and movement of plants.
• Easy to clean and store, easy to handle. Very light - weighs almost nothing!
• Cheaper up to 2.5 times compared to metal analogues.
• Made from environmentally friendly components.
• Invisible in a flower bed or greenhouse.
• The pegs are universal - they can be used in any corner of the site, garden or garden.

Photos of composite plant supports (pegs)

Benefits of plant supports and stakes

Order plant supports with home delivery

Reviews from customers

Photos

Supports for currant bushes

The catalog of our online store contains more than 100 bush holders, supports, harnesses and garters for indoor and garden plants. The cost of devices depends on the size, material and other technical characteristics.

When choosing accessories, consider:

• . material - products are made from environmentally friendly materials;
• . type of plant - nets are designed for bindweed, holders corresponding to their shape have been developed for gladioli and orchids, clips have been created for cucumbers with which they are attached to the twine;
• . place of use - some products are intended for the home, others for the garden;
• . period of use - all devices are made of high-quality plastic or metal and are intended for repeated use.

Product Features

Using plastic bush holders, bushes are fenced and tied up to improve the appearance of the area. Easy to install and does not damage plants.

The circle-shaped flower stands on one leg consist of a PVC-coated metal pipe. Corrosion resistant.

Nets made of polypropylene are resistant to ultraviolet radiation, do not absorb water and do not rot.

The plastic phytolamp stand is installed on the windowsill. Creates conditions for growing seedlings.

Payment and delivery methods:

1. Buy goods online with delivery

• . You can pay for your order in cash or by bank transfer.
• . You will agree on the date and time of delivery with the operator by phone when confirming the order.
• . The conditions for the free provision of the service depend on the city, amount and weight of the product.
• . Unloading of goods, lifting and carrying are considered additional services and may be paid separately, check with the store operator.

Detailed information about intervals and zones by city, conditions for unloading and picking up orders is available on, where you can independently calculate the cost of your delivery in advance, indicating the postal address and parameters for unloading.

2. Order and pick up where you want

• . When filling out the order form, indicate the date and time convenient for you to visit the hypermarket.
• . You can pay for your purchase in cash or by bank transfer at the store's cash desks.

Purchased goods can be picked up independently at any of the OBI stores in Moscow, St. Petersburg, Ryazan, Volgograd, Nizhny Novgorod, Saratov, Kazan, Yekaterinburg, Omsk, Krasnodar, Surgut, Bryansk, Tula and Volzhsky.

Hello, dear summer resident!

In this summer season, In the spring of 2017, I sowed new low-growing varieties of tomatoes for seedlings and even then I was thinking about replenishing the supply of pegs for tying up tomato bushes, but I could not decide on which specific pegs and, most importantly, what material to buy for the existing metal pegs.

I went to the country shops, I looked at the metal pegs, but they were very expensive. Judge for yourself, 10 metal pegs cost 1,500 rubles, but I need not ten pegs, but, for example, 40-45 pieces. So it turns out that you need to shell out a tidy sum from the family budget.

My wife and I have this option, Naturally, it didn’t suit me even then... His Majesty’s chance helped, as happens in many cases!

I once went into a hardware store, I examined the offered range of goods, but did not find anything suitable as pegs. Then I decided to ask the seller if they had anything that could replace metal pegs for tying tomatoes?

The seller, without thinking twice, leads me to a twisted coil of something light and rebar-like (with a ribbed surface) and says that this is an excellent option for pegs. The cost per linear meter was 40 rubles, diameter 10 mm.

There were 50 meters in the twisted bay, which means that if you cut the pegs one meter at a time, you will end up with 50 pegs. Of course, this interested me, but I had no idea what this fittings were made of.

The seller explained to me, that it is an alloy of glass and plastic and this material does not bend or break and is used for concreting foundations and other concrete work, as an alternative to metal reinforcement.

I told the seller that you need to think and weigh everything, and just shell out 2000 rubles. for “no one knows what”, I do not agree. Arriving at the dacha, I started a conversation with my neighbor, and she told me that such fittings went on sale last year and were made not far from our city of Lipetsk.

My neighbor was looking too an additional number of pegs for tying up our tomatoes, and we decided to find out in more detail about the properties of this reinforcement, whether it can really be used as supports for low-growing varieties of tomatoes, and then buy it.

Well, we talked and talked. I was minding my own business at the dacha, and my neighbor needed to go to the city for groceries (she lives at the dacha all summer) and take care of her other affairs.

In short, A couple of hours later, the neighbor returns from the city and calls me to admire her purchase. She opens the trunk of her car (she has a Lada-four), and there is already a roll of fiberglass reinforcement with a diameter of 8 mm, the price per linear meter is 23 rubles. (standard length of a solid rod is 50 meters).

So as not to upset her too much I gently hinted that she was in a hurry to buy such thin fittings, since she had to buy at least 10 mm in diameter, because this thing is bought once and, perhaps, for the rest of her life, but the job was done.

And the situation with diameters here is like this. Based on the external twisted conductors, it turns out to be 8 mm, and the round timber itself (the body itself) of the reinforcement has a diameter of 6 mm, therefore, both in appearance and, in fact, this diameter of the reinforcement looks flimsy and unreliable.

Here, judge for yourself. The pegs themselves, cut one meter at a time from a whole cane, are strong, but their task is to hold the tomato plant in an upright position. But if the tomato variety is very productive, and, God forbid, there are strong winds during the summer season, then the reinforcement may not withstand such a load and fall to the ground along with the bush?

No, it's fiberglass itself it will not break, bend or crack, but simply will not stay in the soil of the plot under such a load of the bush and will collapse.

Based on these considerations, I bought a bay (50 meters) of this fiberglass reinforcement with a diameter of 10 mm. I bought it not in the store where I first saw it, but in a building materials store on the way from home to the dacha.

And, by the way, linear meter in this store it cost me 32.5 rubles. After the purchase, the seller immediately warned me that unwinding the entire whip from the twisted coil must be done carefully and it is better to do this together, since the reinforcement itself is rigid and immediately straightens.

And if you remove all the twists of wire at once, with which the twisted whip is fixed, it’s not even an hour, you can get it in the teeth. Here, in short, I bought such a bay of fiberglass reinforcement (see photo)...

Where to unwind this bay? After all, 50 meters is not that for you...

In short, My wife and I decided to carefully unwind all the whip along the garages. There are no people here and there is plenty of free space. Oh, and my wife and I suffered a lot of fear while unwinding this “wheel”.

And the point here is that when we removed one twist of wire and freed one end, the whole whip, like a clock spring, tried to escape from the hand and straighten out as it pleased.

If it weren't for our four hands, with which we slowly and carefully grabbed one by one along this “wheel”, spinning it one centimeter at a time, we would definitely get hit in the teeth.

But everything went without injuries, the whip lay quietly along 11 garages, and all I had to do was mark out this whole “sausage” one meter at a time with a marker and saw down these pegs.

I sawed this material an ordinary hacksaw with a metal blade. It felt like a knife was cutting butter—the material was being sawed without any effort or strain. And by the way, the length of the whip turned out to be not 50 meters, but 50.5 meters (half a meter extra).

Then I brought these pegs to the dacha, and wanted to immediately insert them next to the tomato bushes, but noticed that on both twisted veins that encircle the “body” of the reinforcement, there was “pubescence” shining in the sun.

You know, like before, if someone worked with glass wool, then after this work all their hands seemed to be covered in glass “needles” and then the body itched from these “needles”.

No, there was no such effect here, since these “needles” were soft (I tried them with my fingers), but, just in case, I still decided to go through these twisted veins with sandpaper, so that in the future there would be no, God forbid, incidents with these “needles” .

After I sanded each peg, I washed them in a bucket of water and laid them out to dry. No, of course, it was possible to immediately insert pegs into the soil next to the bushes, but I approach each job thoroughly and slowly.

The end result of the work there must be not only competent execution, but also beautiful execution.

Not understood, what I'm talking about?

It's simple. You need to stick the pegs in so that their tops are at the same level - this way the whole tomato plot will look much nicer than how these tops will be at different levels of the horizon.

Well, is it true or not?

That is why, After the pegs had dried, I laid them out on the armrests of old chairs, aligning them along the length and marking 25 cm with a marker. This is exactly the length I was going to stick these pegs into the soil, and 75 cm remains above the soil.

For anyone who is more or less short, and a medium-sized variety, this height of pegs will be just right. I then inserted these pegs into the soil of the tomato plots.

And so that you can compare, Whether or not the fiberglass pegs will negatively affect the tomato plants in two adjacent plots with the “Unknown” variety, I used pegs made of different materials.

Here is one plot with metal pegs with the variety “Unknown”...

Second plot of the same variety with pegs made of fiberglass reinforcement...

Here is a plot with the variety “Roma VF”, in which one bed is with metal pegs, and the second is with fiberglass pegs (see photo below)…

And this is a whole plot with only fiberglass pegs, variety “Snow Tale”….

As of June 24, the situation is for the worse has not changed and this is already pleasing. Here are photos from this period.

These are two plots with the “Unknown” variety...

Here's a photo a little closer. Look what branching bushes are growing this year... it’s a pity to even remove them...

These are photos of a plot with the variety “Roma VF”...

This is a plot with the “Snow Fairy Tale” variety...

This is from one side...

This is from the other side...

And so, at the end of this season it will be possible to judge the effect of fiberglass pegs on tomato plants.

If the result is neutral, i.e. there will be no negative impact for the plants, then I will buy another bay of this fittings, since next year I plan to increase the number of tomato plots.

Well, off to the road...

The wife is surprised and happy tomato plants of the “Snow Fairy Tale” variety - they stand like small oak trees! This is the first year that this variety has been growing at our dacha, but I myself am amazed at its power of growth and development.

The wife doesn't even suspect that I have already fermented and applied 8 baths of my infusions of EM-elixir and poured them over the mulch under the plants (I haven’t sprayed them on the leaves for diseases yet) and tomatoes, and apple trees, and currants with gooseberries, and honeysuckle, and onions, and garlic, and potatoes, and carrots, and grape bushes, etc.

Perhaps in July I will start spraying with Elixir and on the leaves of all crops, so as not to give diseases a single chance to “raise their heads”, otherwise the rains do not stop here and the air humidity is very high.

And here comes another rain...

See what a positive effect To control diseases on all crops, spraying with Elixir was carried out in the past 6 years, starting in 2011. Oh, well, that's the same. Can I offer you information that I myself have not used and tested in practice?

I have this principle– try it yourself in your practice, and then, if there is a positive result, you can offer it to people. I don't suggest a "pig in a poke".

Here are some photos of the bath with infusions of EM-elixir at the dacha (look at the shooting date)…

They turned out a little different in color, but the ingredients are the same...

I spilled this particular infusion tall tomatoes in plots near the fence and against the walls of the barn...

One plot near the fence...

East wall of the barn...

South wall of the barn...

The western wall of the barn...

The second plot is near the fence...

The infusion was scooped out to the bottom... and immediately fermented a new one...

Here, in a couple of days the infusion is ready (you see a film on the surface of the water - that means the infusion is ready!)...

I used this infusion and fermented a new one...

And I used this infusion for watering under the bushes currants, gooseberries and honeysuckle...

I haven't used this infusion yet...

If anyone doesn't have my materials yet for the fermentation of reliable and high-quality infusions of EM-elixir, then you can place an order by delivery in Russia on my website - http://elicsir.dacha7.ru/

Who will need the electronic version? these materials (so as not to get confused with the mail) or who has the opportunity and desire to pay for your order using my Sberbank card, write to me at this email address - [email protected]

After receiving the material, Make the first starter immediately and use it on your plants in a couple of days. The weather is warm, so the infusions mature quickly.

And every year your plants will be less affected by fungal and viral diseases and will delight you with a delicious and environmentally friendly harvest of vegetables, fruits and berries!

And the last thing...

Now I have the following questions for you:
« you used pegs made of fiberglass reinforcement?
If yes, was there any negative impact for tomato plants towards the end of the season?
If not,“Are you planning to use this reinforcement as pegs for tying tomatoes, peppers and eggplants?”

Your questions, suggestions and wishes, write in the comments to this post.

And that's all for today, Goodbye.

Best wishes,
Sergey Dyakov.

Composite or, as it is also called, fiberglass reinforcement is an excellent building material for summer cottages and gardens. It consists of polymers and fiberglass, but in terms of strength and practicality it is in no way inferior to steel reinforcement. In addition, it is characterized by lower cost and ease of installation, which is why it is in high demand among summer residents and garden lovers.

How to use fiberglass reinforcement in the country?

Dacha owners often use composite reinforcement for the construction of small buildings and structures. So, most often it is:

• summer kitchens,
• sheds,
• gazebos,
• or toilet.

Also, on its basis you can build a quite decent grill or oven. The main thing is to correctly calculate the amount of material needed and secure it firmly.

Fiberglass rods are suitable not only for erecting walls, but also for laying the foundation of the above buildings. To do this, it is enough to lay them in the form of a dense mesh at the selected construction site of a particular structure, tie them tightly at the fastening points and fill them with concrete.

As we have already said, the price of fiberglass reinforcement is noticeably lower than its metal counterpart (this is clearly seen in the example of products from tpk-kompozit), so the final cost of such a building will be very affordable and economical.

Composite reinforcement in the garden

As for the garden, the fittings we describe here can be safely used for the construction of greenhouses and greenhouses. The latter can be easily constructed by cutting the rods to the required length and firmly securing them in a wooden frame (or directly in the ground).

In addition, it is great for:

• garters of tomatoes, cucumbers, grapes and flowers,
• garters of young trees or shrubs (which will protect their branches from breakage),
• placing pegs in the desired area of ​​the garden or vegetable garden,
• as well as the design of the territory (with its help you can make beautiful barriers, architectural decorations, etc.).

Composite reinforcement is a universal material, the options for which can be used in a dacha are thousands. The main thing is not to be afraid to use it where necessary. It is quite strong and has incredible durability. Therefore, any building or structure based on it will serve for a long time and with high quality, without deteriorating at all from bad weather or exposure to other negative factors.