Attaching polyurethane beams to the ceiling. Installation of decorative beams on a suspended ceiling. Stages of installation of decorative beams

Installing polyurethane beams on a regular ceiling is not very difficult. Such beams are light in weight, and for their installation, Spantan-1K glue, specially developed by the Amaro company, is sufficient.

Attention: It takes 1.5-2 hours for the glue to completely harden. During this time, props should be placed to support the beams.

With a suspended ceiling the situation is more complicated. Stretch ceilings are one of the most functional and effective design solutions, especially in combination with decorative beams. But simply gluing beams to it will not work. There are several options for installing polyurethane beams on suspended ceiling.

Attention: When working with suspended ceilings, you should use gloves, especially if the coating is glossy. Otherwise, there will be unsightly marks on it.

Let's assume that the suspended ceiling has already been made, and the beams that need to be installed are short in length, for example, about 1 meter. In this case, wooden blocks should be secured to the walls, to which the beams are attached with self-tapping screws. The screws can be painted to match the beam itself, thus making them invisible. Due to the fact that the false beam is short, it will not sag. The end result will be interesting. design solution as if a beam were supporting the ceiling.

Installation of long beams to a suspended ceiling

For long beams, the first method will not work, since in this case they will sag. The result will be a very unsightly picture in the form of a gap between the ceiling and the beam. This will be especially noticeable with a glossy ceiling covering. Therefore, if you plan to install long beams, it is necessary to make mortgages before installing the ceiling. They are attached directly to the base ceiling. After tensioning the PVC sheet or fabric through it, bars are attached to the mortgages. Then the decorative beams themselves are attached directly to the bars using self-tapping screws.

Mortgages can be made from wooden blocks, or you can use universal mounting platforms for a chandelier or special adjustable stands. No need to build massive structure made of durable moisture-resistant plywood, like under heavy chandelier, since polyurethane beams are necessarily lightweight.

The mortgage can also be made from a metal profile for plasterboard structures. However, this method of fastening is more suitable for installing decorative elements with greater weight than for lightweight polyurethane beams.

Mortgages must meet the following requirements:

Be aligned. It is better to do the leveling using a laser level according to the level of the future stretch ceiling.
If the stretch ceiling fabric is planned to be made of PVC rather than fabric, then the embedded parts should be smooth and without burrs. Otherwise, sharp edges may damage the canvas.
Mortgages made of wooden blocks must be plastered in places of possible contact with the canvas to avoid damage.

The bars to which the beams are attached are screwed to the mortgages through the suspended ceiling, which means that holes must be made in the canvas for screws. If the ceiling is woven, such holes can be made without fear that the fabric will break. In the case of a PVC ceiling, the holes for screws must be reinforced.

Reinforcement of ceiling openings

The most common two methods are reinforced. The first is to use stickers or universal adhesive tape in place of future holes. However, more reliable and the right way The use of special plastic rings is considered.

An even, thin layer of superglue is applied to the ring and it is attached to the ceiling. You should make sure that the ring is firmly glued to the canvas, after which a hole is cut along its inner diameter with a stationery knife. It is through this hole that the block is attached to the mortgage.

Attention: The information is provided for informational purposes only. We are not responsible for the consequences self-installation. We recommend contacting specialists.

Ceiling beams as a decorative element are installed in rooms to give the interior originality and uniqueness. These may also be released load-bearing beams, and imitations depicting ceiling beams. In any case, each of them will create an atmosphere of comfort and warmth in the room.

Types of ceiling beams

Ceiling beams are installed in various rooms, such as country houses, city apartments, etc. They are also used to delimit an area, for example, to separate the living room from the dining room. There are ceiling beams made of wood and polyurethane.

The planning of wooden beams is carried out in advance, i.e. still at the stage of designing and building a house. The most common wood for their manufacture is larch. Since they are made from natural materials, are environmentally friendly. Under such beams you can easily hide all communications, wires and existing differences in the ceiling.

The disadvantages of wooden elements include the fact that they have significant weight and are not so easy to install yourself. They are also susceptible to rotting, spoilage by microorganisms and have low moisture resistance.

Due to the fact that the beams are made of natural wood, their natural beauty can be enhanced by sanding and impregnation with varnish. You can create a noble look for them by giving the material an artificial age. And in addition they are decorated with either carvings, paintings, or ceramics.

Polyurethane beams are an imitation of natural wooden elements. They are easy to install yourself as they are lightweight. Since they are made from artificial materials, have increased moisture resistance and do not rot. Polyurethane parts are made in a U-shape, so communications and pipes are well hidden under them. You can create them as smooth varnished surface, and the old cracked one.

Ceiling beams: harmony in style

Decorative elements on the ceiling in the form of beams can be used in different styles, ranging from classics to hi-tech. If the interior is designed in an elegant classic style, then the surface of the beams should be smooth and varnished.

If there are elements of luxury in the interior, it is best to paint them in light colors, for example, in the tone of silver, and decorate them with carvings or paintings. For an interior designed in a modern style, details with smooth surface. They can be colored either dark or light colors, and in a brighter, mischievous color using backlighting on them.

In the hi-tech (loft) style, beams painted with metallic effect paint that are in harmony with brickwork. If the house is decorated in a rural style, then decorate it better elements, made to resemble an old tree. In color they can be either light on a dark ceiling or very dark with a rough finish on a light background.

For French lovers rural style– Provence – for decoration it is better to use well-treated and bleached wooden beams. To decorate rooms in an ethnic style, either natural ceiling elements or their imitation made of polyurethane with a wood-like texture are used.

When choosing color range For beams on the ceiling, harmony must be observed. For example, a design with a contrasting color scheme looks great. In this case, to highlight the decor, a combination of dark wood with a white ceiling or vice versa is performed.

And for more bright interior you can combine any colors, for example, a yellow ceiling and blue beams, a turquoise ceiling and white beams. It can also be done so that decorative element was the same color as the surface of the ceiling. At the same time, parts painted to match will give the room an expressive structure and visually increase the volume of the room.

Choosing for decoration color scheme, you need to remember that the beams installed on the ceiling must match one of the interior elements in color, for example, with the shade of furniture or with the flooring.

You should also remember that dark decor looks bulky and gives the room a graphic feel. Light shades look lighter and more sophisticated, giving the atmosphere a restrained coldness.

Installation of decorative beams

You will need:

metal profiles;
screwdriver;
liquid nails;
drywall or plywood.

Beams look great in rooms with high ceilings. In this case, to give comfort to the room, decorative elements are installed, retreating from the surface at a certain distance. In order to visually cover a low ceiling, a structure is made that smoothly transitions to the walls, or strips are placed on them to match the color of the beams.

With the help of decor, you can create the appearance of changing the geometry of the room. In this case, in narrow rooms elements are installed along their width, and to extend the room - along the longest wall. If you need to highlight only part of the room in the interior, then the beams can be arranged in the form of a herringbone or lattice. Or, with their help, you can divide the room into zones, placing decor at their junction and installing lamps in it.

All communications, such as electrical wiring, pipes, etc., are easily hidden under the decorative elements. Therefore, lighting can be installed directly on them. To do this, you can embed the lamps directly into the beam or attach it to it using brackets. The design with an LED strip mounted on its top looks very original.

If installed suspended ceiling, which covers all the wiring, then the beam in this case will serve only as a decorative element. At the same time, various paintings in the form of an ornament can be applied to it, which must be duplicated on other elements of the interior. If the decor is located in the kitchen, then you can place a special device with hangers (railing) on it, on which kitchen utensils are stored.

Installation of polyurethane beams on the ceiling can be done in several ways. If the decor is heavy, then first, in places where it will be further installed, a lathing is made from metal profiles or wooden slats(timber). Then the beams are fixed to it using self-tapping screws. Lighter weight elements are attached to the ceiling liquid nails. For greater reliability, a combined fastening method is used. In this case, the parts are both glued and fixed to the sheathing.

You can make a beam yourself from plasterboard or plywood for the interior of the room. To do this, markings are made on the ceiling, and a durable frame made of metal profiles is installed for each element. After this, parts are cut out of the material required size. Then they are screwed to the prepared frame using self-tapping screws. At the end, all the resulting boxes are treated with putty, then a primer and then covered with paint or covered with wood-like film.

Competent installation and decoration of ceiling beams, features of installation of products from different materials, ways to finish old beams.

Contents of the article:

Finishing ceiling surface beams looks stylish and respectable. This is a great way to emphasize the originality of the design and transform the room. Laying wooden beams on the ceiling is carried out during the construction of the house. However, such elements are heavy and expensive, therefore, for decoration, peculiar false beams made of different materials are most often attached.

Ceiling beam design styles

If you decide to finish the ceiling in this particular way, then you need to correctly combine the installed beam with other decorative elements. Moreover, if you have certain design skills, this detail can be used in almost any style.

Let's look at what style solutions can be used to decorate beams:

Classical. Beams made of wood or material imitating wood, combined with furniture or parquet to match, are undoubtedly a classic. Contrasting looks original dark wood on a pastel light background. But carving and painting will add respectability to the traditional interior.
Victorian. Premises decorated in this style look aristocratic and luxurious. Therefore, the beams must be installed from expensive mahogany wood with an antique finish.
Modern. Beams in rooms with this design can be painted in bright colors, install lighting inside and implement various stylistic ideas.
High-tech and loft. Finishing the ceiling in such rooms with polyurethane beams with a texture that imitates metal will be very useful. Especially if the walls in the room are in the form of brickwork.
Provence. Ideally smooth, snow-white painted beams on the ceiling will be an excellent addition to the French, rural style.
Rustic. Rough wood finishing, emphasizing the natural structure of the material, is the best option.

Do-it-yourself technology for installing beams on the ceiling

Equipment for simulating beams on the ceiling consists of several stages. In order to carry out installation work quickly and efficiently, you need to decide on the type of model, correctly draw up a diagram taking into account the characteristics of the room and securely fasten it so that the structure is smooth and durable.

Rules for drawing ceiling beams

The placement of beams on the ceiling can visually expand the space or make the room appear lower. Therefore, their installation scheme primarily depends on the effect you want to achieve.

If the beams are placed along the length of the room, it can be visually lengthened even more. Accordingly, to expand the space, the ceiling elements are placed crosswise.
The cross-shaped fastening of the beams visually makes the space more voluminous.
You can visually reduce the height of the room by fixing the beams below the ceiling.
One beam with installed lamps or other decorative details can divide the room into zones.
Placing several beams in one part of the room will visually highlight it. In this case, the elements do not have to be fastened parallel or crosswise. The Christmas tree arrangement looks interesting.
You can visually increase the height of the room by fixing the structures to the wall and extending them onto the ceiling covering. In this case, it is not necessary to fix the entire beam on the ceiling, but only part of it.

The correct placement of ceiling elements will allow you to change the geometry of almost any room. Before drawing up the drawing, you must measure all the walls. Also include a communications supply diagram in the project.

Selection of materials for mounting beams on the ceiling

Variety of construction and finishing materials allows you to use for mounting beams:

Wood. It is environmentally friendly and looks respectable. Most often preference is given coniferous species(pine, larch, spruce, cedar). They are more practical and durable. Hardwood(for example, oak) are used less frequently due to their high cost.
Drywall. Practical, relatively inexpensive, easy to process. It can be finished in almost any way.
Polyurethane. Modern material, characterized by high performance characteristics. It is released in wide range colors and textures, is lightweight and moisture resistant.

Whatever material you choose for installing beams on the ceiling with your own hands, consider how harmoniously the products will fit into the overall design.

Beams made of artificial materials also differ in types of profiles:

From chipboard or MDF. In this case, veneer elements in parts with straight joints are connected at angles of 90 or 45 degrees. Beams with rounded edges are made of veneered MDF or chipboard and connected with a profiled strip on internal joint. Such models can be patinated and painted.
From lamellas durable wood . Oak, ash, pine, and larch are used for production. May have straight or rounded edges. Processed like regular wood.
From the array. In production, ordinary timber is used. The beam can be suspended or load-bearing. The cladding is carried out in the same way as with ordinary wood. These models will cost much more.

When selecting manufacturing materials, it is important to take into account the specifics of the room in which installation is planned. For installation in conditions high humidity, for example, polyurethane products are optimal.

Preparing to install ceiling beams

Before proceeding with the installation of beams on the ceiling, the coating should be prepared. This is a stage consisting of the following processes:

We remove all the furniture from the room, remove lighting fixtures, mirrors, curtains, carpets, cornices.
We clean the surface from the old finishing layer.
We get rid of insecurely fixed elements.
If necessary, remove the old wiring.
We treat mold, mildew or rust stains with a special primer. You need to get rid of them, otherwise they will later appear on the new finish.
Seal with cement-based putty large cracks and cracks.
We prime the coating with an antiseptic composition.
We level the surface with plaster (for unevenness of 5 cm) or starting putty (for unevenness of up to 5 cm).
We prime the ceiling and cover it with fiberglass for reinforcement.
Apply a layer finishing putty and wait for it to dry.
We sand the roughness with fine-grained paper and impregnate it with an acrylate-based primer.

Features of fastening wooden beams to the ceiling

Ceiling elements made of natural wood are heavy, and therefore the reliability of fixation must be given special attention. The beams themselves can be purchased ready-made or made from timber yourself. In the latter case, you should choose a tree with a shrinkage of up to 12%, which has no damage or traces of rot. It is also important to treat the material with antiseptic compounds to protect it from moisture, mold, rodents and insects.

We perform the installation as follows:

We adjust the ends of the elements using a plane and sand them with fine-grained paper for the tightest possible fit.
We fix the bars to the side panels using self-tapping screws.
To fix the lower element with a drill, we drill holes in the bars in increments of 15-20 cm. They should be located at an angle of 90 degrees to the screws connecting the bar and the sidewall. The distance from each hole to the screw should be about 5 cm.
For reliability, we coat the wood with wood glue at the joints.
We connect all the parts with self-tapping screws, forming a U-shaped false beam.
We fix the bars on the ceiling in increments of 0.5 meters. The width of the bar must correspond internal size box emptiness.
We attach the beam to the bars using self-tapping screws, deepening the fastener heads inward.
We cover the recesses with putty to match the color of the wood.
We are finishing the ceiling element.

Please note that in order not to damage the ceiling finish, when painting the beam, you can paste over the joints with ceiling covering masking tape.

How to install plasterboard beams on the ceiling

The correct installation of a plasterboard structure on the ceiling, first of all, depends on the accuracy of the markings. That is why, using a level, tape measure and tapping cord, it is recommended to first mark the profile fastening lines and only then begin work.

Before making a beam on a gypsum board ceiling, we recommend that you read the installation instructions:

We attach the guide profile using dowels along the marked lines.
We make sections from the supporting profile that will be equal to the height of the beam.
Insert the cut pieces into starting profile and fasten with self-tapping screws in increments of 10-15 cm.
Along the bottom edge we connect all the segments with a guide profile.
Jigsaw or sharp knife for drywall, cut out parts from sheets according to the dimensions of the beam.
We attach the drywall to the profile with self-tapping screws.
We cover the joints with sickle tape. We putty the gaps and deepening places of the fasteners.
Apply a finishing layer of putty and, after complete drying, smooth out the roughness with fine-grained sanding paper.
We prime the surface and finish the beam.

To install such a structure, it is better to use gypsum boards with a thickness of 9 mm.

Fixing polyurethane beams to the ceiling

The main advantage of installing polyurethane beams on the ceiling is the simplicity and efficiency of installation work. The design is lightweight, so to attach a polyurethane beam of standard length (3 meters) you only need three wedge bars.

In the process, we adhere to the following action plan:

We mark the beam fastening.
We drill a hole in the wedge-bar with a diameter of 2 mm less than that used to fix the screw.
We screw the blanks to the ceiling in increments of up to one meter. If a joint of elements is planned, then a wedge must also be secured to it.
Processing special glue surfaces of the wedges and attach the beam.
For additional reliability, we secure the structure with self-tapping screws.

If you want to hide communications inside the beam, then you can make cutouts in the bars through which corrugated pipe wires are laid.

Ways to decorate old beams on the ceiling

Installing false beams does not take much time and does not require special skills. Anyone can handle installation work. But what to do if there are already old beams on the ceiling? They can be given an aesthetic appearance.

To do this, you need to use the following methods: painting (if necessary, preliminary putty and primer), installation on old design polyurethane false beams, decoration with ropes in nautical style, pasting mirror tiles. If there is a beam in the kitchen, then you can attach a special suspension (railing) to it and use it to store dishes, bags of herbs and kitchen utensils. Using the same methods, you can beat a concrete beam on the ceiling.

As for the ways complete camouflage ceiling elements, the most common are:

Tension fabric. In order not to lose ceiling height, you can make a two-level structure.
Plasterboard ceiling. The sheets and frame must be attached to the ceiling, and not to the beam.
Caisson structure. The most elegant and expensive option.
Lining. The easiest way. Instead of lining, you can even use an ordinary edged board.

Please note that you can completely mask the beam only in high rooms, otherwise, by hiding 15-20 cm of the height of the room, you can absolutely ruin the interior.

How to decorate beams on the ceiling - watch the video:

In the material, we examined the main methods of installing false beams on ceilings made of different materials. Acting according to the instructions and taking into account the recommendations, you will be able to perform installation work. And the tips provided on how to decorate a beam on the ceiling will help you transform the room and make this element not only decorative, but also functional.

Previously, beams under the ceiling solved a completely functional task - they supported ceiling. Now this purely decorative element is most often found in interiors made in a rustic or Old English style, in Provence, country and chalet styles. It’s a good idea to integrate beams into modern styles interior: loft, modern, minimalism, hi-tech.

Decorative ones look most advantageous in rooms with high ceilings, which dictates their placement mainly in houses with a ceiling height of three meters or more. Wooden beams under the ceiling - stylish element home decoration, emphasizing the spaciousness of the room, and in some cases carrying a functional load (for example, it is used to hide communications). Most often, beams are placed in kitchens, hallways, halls and offices.

Types of beams

Certainly, modern houses rarely decorated with real wooden elements under the ceiling. Although there are connoisseurs of natural things who prefer real heavy beams for ceiling decoration, usually in a country house.

Building materials stores offer a huge selection of false beams made of lightweight and easy-to-install polyurethane. Visually, such elements are indistinguishable from natural wood, and in practice they even surpass it in some ways.

The advantages of polyurethane false beams include the fact that they:

are not afraid of dampness, do not swell from excess moisture;
do not crack or deform;
very easy to attach to the ceiling (including suspended ceilings).

However, lovers of naturalness can opt for false beams made of MDF or chipboard, hollow inside. Veneers made of wood are glued onto such beams. valuable species tree. You can find options made from lamellas. Beams come with sharp and rounded edges, U-shaped and L-shaped (to decorate joints).

Table. Comparison of polyurethane and wooden false beams.

To design a high-tech style, some designers use metal beams, however, such elements are more difficult to install and require professionals to install them.

How to make decorative ceiling beams with your own hands

Some craftsmen make beams with their own hands, which takes a minimum of time and is inexpensive. For example, in order to make false beams, you can use ordinary foam plastic, which is left over from insulating a garage or loggia.

Step 1. Cut sheets 4-5 cm thick into strips of the required width.

Step 2. Glue the strips with liquid nails into a U-shaped beam.

Step 3. After setting, cut the beams into pieces of the required length.

Step 4. Cover the beams with self-adhesive wood-like film (except for the side that will be glued to the wall).

Using the same technology, you can make beams from plywood or even regular boards. The boards can then be aged, covered with stain and varnish.

If you want to make beams from natural timber, you can buy edged polished timber, for example, 70x50. When choosing, be sure to check that it is smooth and dry. Then you need to treat it with stain and varnish and cut it to the required length. This is also an inexpensive and accessible option.

Decorating beams

Each interior style will require its own style of beam design.

For classical and Victorian styles, you can decorate the beams with gold carvings, decorate them with patterns and vignettes. You can find such ready-made polyurethane beams on sale.
White, black, brown and also colored beams will be ideal solution for modern interiors.
For high-tech style suitable design beams for metal.
To create a country style, the wood will need to be aged.
The rural style (country) is characterized by a distinctly rough texture.

Options for placing beams on the ceiling

False beams can be used to decorate any type of ceiling: suspended, plasterboard, regular painted, etc. With their help, you can zone a room or create such a popular decorative element as a false window on the ceiling with imitation of stained glass. Decorative beams can imitate window coverings, between which, during the work process, a canvas with photo printing, mosaics, frescoes and even mirror panels are glued. The modern European trend is very interesting, when beams go onto walls.

Beams can be decorated on top LED backlight, which will give a special decorative effect. The beams in which they are mounted look amazing ceiling lights. All wiring in this case is hidden inside the hollow structure.

In general, beams on the ceiling will give a feeling of warmth and comfort to the living space, add zest to modern interior styles and allow you to create the necessary authenticity in public institutions such as clubs or pubs.

How to position the beams

If the room needs visual expansion, then the following points should be taken into account when arranging the beams.

If you need to make the room wider, then the beams need to be placed on the short side.
If you need to increase the length, the beams should be placed along the entire length of the ceiling.
A criss-cross arrangement will give the room visual volume.
One beam can highlight a separate area: for example, a bar counter.

The frequency of location also plays a big role. For example, if the ceiling height is very high (which happens on the first floors of buildings), placing the beams close to each other helps to reduce it a little. If the ceilings are of medium height, the beams should be mounted on greater distance from each other. Beams can also be laid in a herringbone pattern. Attic rooms without a ceiling they look especially impressive if the ceiling beams pass through the columns and are attached at the ends to the walls, creating the effect of a hut.

How to attach beams to the ceiling

The specifics of the procedure depend on the material from which the false beams are made. Let's take a closer look at each of the options.

How to glue foam false beams to a regular ceiling

This is the simplest option for placing false beams in modern apartment. If you want to decorate your kitchen or living room quickly, inexpensively and on our own, best option can't be found.

Step 1. First, marks are made on the ceiling and walls to indicate the places where the false beams will be glued. The sticker areas need to be primed for better adhesion.

Step 2. Then the beam is coated with liquid nails and glued to the required place. Foam products are practically weightless, and liquid nails set literally instantly.

Some instructions advise to apply it to the wall at the same time, but if there is too much glue, the beam may begin to slide down the wall. Therefore, the golden mean must be determined experimentally.

Step 3. If the room is narrow, you can stick 2 beams along the long walls of the room, and simply place the cross beams perpendicular to them. Such simple ceiling will help hide the unevenness of the usual concrete ceiling and it will look very advantageous.

How to quickly secure wooden beams to a wooden or concrete ceiling

This is also not very difficult or expensive to do.

Step 1. We draw lines on the ceiling for placement.

Step 2. We drill holes in the timber with a 12 mm drill no more than 0.5 centimeters deep every 30 cm.

Step 3. In the same holes we drill 8 mm holes into which we drive 120 mm self-tapping screws.

Step 4. We apply timber and mark the locations for the holes in the ceiling.

Step 5. Drill 8 mm holes on the ceiling in the marked places using a hammer drill.

Step 6. We drive chopsticks into them.

Step 7 We screw the beam.

Since the head of the screw is hidden, we cover these places with wood putty. After drying, tint with stain, then varnish. You can cover the screw heads with wooden plugs or special decorative overlays that imitate the heads of forged nails. You can attach nails to regular dowels - this is an even faster option.

If cross distribution of beams is planned, unevenness may occur at the joints. The design of these units depends on the style in which the room is decorated. If it is country, for example, then these places can be covered with leather decorative belts or large twine glued in several rows.

Installation of polyurethane decorative beams on beams

This professional way installation

Decorative beam B1 made of polyurethane (wenge, cherry, oak, olive, walnut, light oak)

Step 1. For polyurethane false beams, wedge beams are made of wood, which completely correspond to the internal cavity of the beam.

Step 2. The ceiling is marked: lines are drawn along which the beams will be attached.

Step 3. The wedge bars are installed along a line every 1 meter using screws or dowels.

Step 4. When installing a false beam, polyurethane adhesive is applied to the ceiling. This is not necessary for fixation, but for a tighter fit to the ceiling so that there are no gaps left.

Step 5. The beam is tightly placed on the beams and screwed through the sides with screws.

Step 6. The screws that attach the false beam to the beam and the joints of the beams are covered with decorative leather straps with imitation rivets.

Features of the installation of beams on a suspended ceiling

To make a suspended ceiling and decorate it with decorative tanks, you should install embedded parts, similar to those installed for hanging chandeliers. Embedding for a decorative false beam is easy wooden block required thickness. It is attached to the main ceiling, and the suspended ceiling is stretched in such a way that it passes touching the lower plane of the bar. Then false beams are attached through the ceiling to the beam.

You can use fastening of beams using hangers. Suspensions are attached to the base. and after tensioning the ceiling, slits are made in the canvas. Specific actions depend on the type of material.

If the suspended ceiling has been hanging for a long time, but you want to somehow diversify the interior without dismantling the canvas, you can use external consoles with fasteners to the wall or internal bars screwed to the walls. Beams will be attached to them with self-tapping screws.

Features of the installation of beams on a plasterboard ceiling

Because plasterboard ceiling It is suspended, you can’t just attach beams to it. You will have to remember/tap the places where the frame profiles go and attach the beams to them. Can be attached to any in a convenient way: with a long anchor through the beam, gypsum board and profile or on a block attached with a self-tapping screw to the gypsum board and profile. A self-tapping screw screwed exclusively onto drywall will not hold the beam for long.

Some nuances

The joints of beams or the exit points of self-tapping screws are covered various kinds decorative overlays, among which are the following:

camouflage with decorative rope;
masking with wax pencil;
masking with forged copper plates;
decorative leather belts.

To decorate the space, you can use decorative consoles, which are sold together with beams and create an imitation of supports on the walls. If cables will run inside the polyurethane beam for lighting fixtures, then they must be hidden in corrugated protection.

Video - Installation of wooden decorative beams on the ceiling

This way you can get a very beautiful unusual interior with an emphasis on wooden beams under the ceiling. This interior does not require a large investment of money, and you can fix the beams with your own hands literally within a few hours.